START
*Note 1
Max. Target Value
Apply Torque
Released
Apply Torque
Current Max. Value
(Peak Hold)
Over 90% of Max. Target Value
Green LED
Over 90% of Set Torque
Buzzer
Buzzer
*Note 2
Over Max. Target Value
Red LED
Over Max. Set Torque
((…((… …))…)) ((…((… …)) …))
(((((((( )))))))) (((((((( ))))))))
*Note 3
3.9
PEAK HOLD MODE OPERATION
(System initial)
Flashing
n n n
n n n
4. CALIBRATION & MAINTENANCE
4.2
BATTERY MAINTENANCE
For replacement of batteries refer to section 3.1. Ensure that
contacts are clean before replacing batteries.
Note:
If the wrench is not used for an extended period of time, remove
the batteries.
WARNING!
DO NOT
mix battery types or combine used
batteries with new ones.
4
Dispose of used batteries in accordance with local authority
regulations.
8
DO NOT
throw batteries into a fire.
4.1
CALIBRATION
Annual recalibration of the torque wrench is necessary to
maintain accuracy. Please contact your Sealey dealer.
Declaration of Conformity
We, the sole importer into the uK, declare that the product listed below is in conformity with the following
standards and directives.
The construction file for this product is held by the Manufacturer and may be inspected on request by
contacting Jack Sealey Ltd.
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products.
5th June 2009
Signed by Steve Buckle
Digital Torque Wrench
Model No: STW298
2002/95/EC RoHS Directive
2002/96/EC WEEE Directive
5. DECLARATION OF CONFORMITY
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our catalogue and latest promotions call us on 01284 757525 and leave your full name, address and postcode.
01284 757500
www.sealey.co.uk
01284 703534
Sole U.K. Distributor
Sealey Group
Bury St. Edmunds
Suffolk.
Web
Note:
If the display shows the wrench has had a torque
1.
of more than 110% of the maximum specification applied.
The green LED will be on for 90% of maximum setting
2.
torque.
The red LED will be on 100% of maximum setting torque.
3.
STW298 Issue No: 1 - 02/06/09
