9
Maintain power tools and accessories carefully. Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use.
9
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier
to control.
9
Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions
and the work to be performed.
WARNING!
Using the power tool for operations different from those intended could result in a hazardous situation.
9
Keep handles and gripping surfaces dry, clean and free from oil and grease.
9
Have your power tool serviced by a qualified repair person using only identical replacement parts.
9
Hold the power tool by its insulated gripping surfaces when performing an operation where the cutting accessory may contact
hidden wiring or its own cord. Cutting a “live” wire may make exposed metal parts of the power tool “live” and could give
the operator an electric shock.
9
Use clamps to secure and support the workpiece to a stable platform.
9
Use appropriate detection equipment to track down concealed supply lines or consult the local utility companies. Contact with
electrical lines may result in fire and electric shock. Damaging a gas line may lead to an explosion. Penetrating a water line causes
property damage and may cause an electric shock.
9
Vibrations can be harmful to the human hand-arm system. Keep the vibration exposure time to a minimum.
9
Ensure the shank of the cutting blade is clean before inserting it.
9
Check that the cutting blade is installed correctly. A loose cutting blade could fall out and may cause personal injury.
8
DO NOT
work on moistened material or moist surfaces.
9
Only hold the power tool against the workpiece when the tool is switched on and running. Otherwise there is a risk of kickbacks.
9
Make sure that the guide is positioned securely on the contact face during sawing. A jammed saw blade could break or cause
a kickback.
WARNING!
Keep hands out of the sawing area.
8
DO NOT
reach underneath the workpiece.
WARNING!
Keep hands away from quick-release clamp. Crushing hazard upon contact with these components.
9
Ensure there is sufficient ventilation. The use of a dust extraction system may reduce dust-related hazards.
9
Only use intact, flawless cutting blades. Bent and blunt cutting blades could break or cause a kickback.
8
DO NOT
attempt to slow down the cutting blade movement by pressing against the blade from the side once the device is switched
off. The cutting blade could be damaged, break or cause a kickback.
9
Switch off the power tool when your operation is completed.
8
DO NOT
remove the cutting blade from the workpiece until it has come to a standstill.
9
Immediately switch off the power tool if the cutting blade gets jammed.
9
Wait until the power tool has come to a standstill, before putting it down.
9
Only use the device for sawing plastic, wood, metal and building materials using the suitable cutting blade. The device may be
used for:
•
Sawing work,
•
Straight and curved cuts,
•
Flush cutting of protruding workpieces
9
Whilst adhering to the technical data. We recommend using the power tool with original Sealey accessories.
WARNING!
This device is not intended for cutting glass or stone.
8
Check the saw for damages and proper functioning before each use. If you notice any damage, stop using the saw.
8
DO NOT
use the saw when the saw or your hands are damp or wet!
9
Work on the electrical components must only be carried out by an authorised specialist company!
9
Warning of electrical voltage. Before any work on the device, remove the mains plug from the mains socket. Hold onto the mains
plug while pulling the power cable out of the mains socket.
8
There is a risk of a short-circuit due to liquids penetrating the housing!
8
DO NOT
immerse the device and the accessories in water. Make sure that no water or other liquids can enter the housing.
WARNING!
The cutting blade might still be hot after the application. Burn hazard when touching the cutting blade.
8
DO NOT
touch the cutting blade bare-handed. Wear protective gloves.
WARNING!
Hand injuries, crushing hazard near cutting blade and guide if handled without due care. Wear protective gloves.
WARNING!
Sharp object. Parts of the cutting blade are sharp. Risk of injuries if handled without due care. Wear protective gloves.
WARNING!
Toxic dusts. The harmful / toxic dusts produced during operation pose of risk to the health of the operator and persons
in the vicinity.
WARNING!
DO NOT
cut materials containing asbestos. Asbestos is considered carcinogenic.
WARNING!
Risk of injuries caused by flying parts or bursting tool heads.
WARNING!
Dangers can occur at the device when it is used by untrained people in an unprofessional or improper way.
WARNING!
The device is not a toy and does not belong in the hands of children.
WARNING!
Vibration emissions, can cause a health hazard if the device is used for an extended period of time or if it is not
properly handled and maintained.
9
Keep a sufficient distance from heat sources.
9
The device may be damaged if you store or transport the device improperly.
8
DO NOT
reconnect a defective device to the mains.
8
DO NOT
operate the product with one hand. Grip the saw firmly with both hands.
9
Work only in daylight or good artificial light.
9
If using an extension cable ensure that is clearly marked for outdoor use.
8
DO NOT
use in the rain or if there is a risk of lightning.
8
DO NOT
operate the saw in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
WARNING!
The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations that may occur.
It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be
applied by the operator.
Original Language Version
© Jack Sealey Limited
S
RS850.V2 Issue 1 12/04/22
