•
10
•
PROBlEM
POSSIBlE CAUSE
REASON/SOlUTION
i cannot select a 6V or
12V setting.
the charger is equipped with
Auto Voltage Detection, which
automatically detects the voltage
and charges the battery.
no problem; this is normal.
the yellow/orange
LED is flashing.
the battery is sulfated.
the battery is too large for the
charger.
Reset the charger by briefly
unplugging it.
You need a charger with a higher
amp rate.
the red
LED is
flashing.
the clamps are not making a
good connection.
the fuse is bad.
check for poor connection at
battery and frame.
replace the in-line fuse for the
ring connector.
17. SPECIFICATIONS
input .................................................................................................. 230V Ac~50Hz, 0.5A
output ................................................................................................. 6V 2A, 12V 2A
Dimensions – H x W x D
...........................................................193 mm x 84 mm x 78 mm
Weight ..................................................................................................................... 0.65 kg
output protection .......................................................................................................... Yes
reverse polarity protection, spark/arc-proof ................................................................. Yes
ingress Protection rating ..............................................................................................iP54
Sole uK Distributor,
Sealey Group.
Kempson Way,
Suffolk Business Park,
Bury St. Edmunds, Suffolk.
iP32 7Ar
www.sealey.co.uk
01284 757500
01284 703534
Web