2. INTRODUCTION
Professional Lithium-ion cordless soldering iron. Ideal for multiple applications including automotive soldering in-and-around engine
bays. Heats up to working temperature in 25 seconds. Integral LED work lights (x2). Auto shut-off after 10mins. Unit features a sturdy
base stand and is supplied with a mains charger. Maximum Temperature: 450°C.
3. SPECIFICATION
Model No:.....................................................................SDL7
Battery: ..........................................................4V 1.5Ah Li-ion
Charging time:...................................................................3hr
Maximum temperature ................................................. 450
o
C
Operating time ............................................................. 50min
Power rating ......................................................................8W
IMPORTANT WARRANTY INFORMATION
T
he battery fitted to this iron is considered to be a consumable item and its ability to accept a charge will reduce over time.
We will provide warranty against mechanical and electrical defect for a period of one year - this does not cover fair wear and tear.
I
f the battery is not properly charged before first use, or regularly conditioned, its capacity will diminish. Under these circumstances we will
not replace the battery regardless of whether it is less than one year old.
NOTE:
The lithium battery does not suffer from memory effect and once fully charged may be stored for up to six months without another
charge.
4. OPERATION
4.1.
Plug in charger and ensure that the soldering iron is fully
charged before first use. The battery charge indicator (fig.1) is
red when charging and green once fully charged.
4.2.
To switch on, remove the soldering iron from the charging dock
and press the On/Off button (fig.1). The two work lights will
illuminate.
4.3.
Hold down the On/Off button, the soldering tip warms up and
the battery charge / state indicator will glow red until the tip
is up to temperature. When the tip reaches the working
temperature the light will glow green.
4.4.
The tip will maintain the working temperature for 10 minutes
and the green light will show in the state indicator after which
it will turn off.
4.5.
To recommence soldering, after a brief period, repeat
4.2, 4.3 and 4.4.
Original Language Version
© Jack Sealey Limited
fig.1
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without
prior notice.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
BATTERY REMOVAL
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of
products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance
scheme. Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705.
SDL7.V2 Issue 1 13/11/2020
