WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
6. MAINTENANCE
WARNING!
Disconnect from power source before attempting any cleaning or maintenance.
6.1.
In order to ensure good contact with heating nails, please keep the small holes of copper rods clean.
8
DO NOT
place keep tool in a dusty place.
6.2.
Keep the small hole on the gun body of the device clean to ensure good internal heat dissipation.
Original Language Version
© Jack Sealey Limited
S
DL15 Issue 2 (2,3) 16/06/22
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts
without prior notice.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Parts support is available for this product. Please email [email protected] or telephone 01284 757500
REGISTER YOUR
PURCHASE HERE
