instructions for
air operated panel dryer with adjustable
airflow - composite
model no:
sda03.V2
thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. safety
9
familiarise yourself with this product’s application and limitations.
WARNING!
disconnect the panel dryer from the air supply before performing any maintenance.
9
maintain the
dryer in good condition.
9
replace or repair damaged parts.
Use recommended parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
9
locate the dryer in an adequate working area for its function, keep area clean and tidy and free from unrelated materials and ensure
there is adequate ventilation and lighting.
9
Keep the dryer clean for best and safest performance.
9
ensure the air system is suitable to the dryer consumption, (see specifications).
9
Wear approved respiratory protection and safety eye goggles.
9
Keep children and unauthorised persons away from the working area.
9
When not in use ensure the air supply is turned off.
8
do not
use the dryer for any purpose other than for which it is designed.
8
do not
operate dryer if any parts are missing or damaged as this may cause failure or personal injury.
8
do not
direct air from the air hose at yourself or others.
9
When not in use switch the dryer off and disconnect from the air supply.
2. introduction
designed for drying water-based paints. light weight, composite panel dryer operates on workshop air supply. filter prevents airborne particles
contaminating paint surface. Adjustable air flow to regulate as required. ideal for localized or spot repair. may be hand-held or mounted on
optional double support stand - model no. sdAst.
3. specification
m
model no: ...................................................................sda03
max. Working Pressure: ...................................................90psi
Air consumption: .....................7cfm @ 40psi, 15cfm @ 90psi
Air connection ............................................................
1/4” BsP
refer to
instruction
manual
sdA03.V2 issue:1 22/09/15
Original Language Version
© Jack sealey limited
Wear eye
Protection
Wear
respiratory
protection
