2. INTRODUCTION
Model No. SD001
- Ergonomic design reduces hand fatigue. 5 Position temperature LED display. Built-in PID system. Auto sleep and auto
shutdown. Includes 1.5m cable with 3-pin plug. Complies with Low Voltage Directive and Electromagnetic Compatibility Directives.
Model No. SD002
- Ergonomic design reduces hand fatigue. 9 Pre-set temperature LCD display. Built-in PID system. Auto sleep and
auto shutdown. Replaceable soldering tip. Includes 1.5m cable with 3-pin plug. Complies with Low Voltage Directive and Electromagnetic
Compatibility Directives.
3. SPECIFICATION
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . SD001 . . . . . . . . . . . .SD002
Power Rating:. . . . . . . . . . . . . . . . . . . . . . . . . . . .
80W
. . . . . . . . . . . . . .
80W
Consumable Parts:
. . . . . . . . . Soldering Tip for both . . . . . . . .
SD001ST
4. OPERATION
WARNING!
When plugged in, do not touch any part of the iron other than the grip. Failure to do so, may result in serious burns.
8
NEVER
leave the iron unattended while plugged in.
4.1.
Once plugged in to a suitable power supply, the iron will begin to get hot.
4.2.
Change the temperature setting using the + or - buttons located on the handle (fig.1).
4.3.
Unplug the soldering iron and wait for it to cool down completely before moving.
5. MAINTENANCE
8
DO NOT
open the casing; there are no user-servicable parts inside. In case of malfunction, return to your Sealey stockist or Service Agent.
5.1. CLEANING
8
DO NOT
shock the iron tip to remove excess solder; use the dampened sponge wiper.
9
Clean the casing with a moist, soapy cloth, having ensured that the unit is isolated from the electrical supply.
S
D001 / SD002 | Issue 1 06/08/2019
Original Language Version
© Jack Sealey Limited
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Parts support is available for this product. Please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500
SD002
SD001
