5. MAINTENANCE
5.1.
After use, vent the pressure (see section 4.6.) and rinse out with clean water.
5.2.
If the fan nozzle becomes blocked, remove and rinse out with water.
DO NOT
use a metal object to clear.
5.3.
A fibre filter is installed behind the nozzle
.
If this becomes dirty, wash in clean water. If it is damaged or extremely dirty, fit a replacement
filter (supplied) as in fig.3. Remove the dirty filter with a pointed object.
5.4.
Apply a little light oil to the pump stem periodically.
5.5.
Clean the sprayer with a damp cloth:
DO NOT
use abrasive or solvent cleaners.
5.6.
When not in use, store in a cool, dry, childproof location.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
SCSG08 Issue:1 - 09/07/17
Original Language Version
© Jack Sealey Limited
4.7.
The sprayer includes 3 mixers, allowing different air/fluid mixtures:
The sprayer is fitted with the grey mixer as standard; this produces a general purpose foam consistency.
The green mixer, packed separately, produces a dry foam for use when a wet finish is not desirable, e.g. upholstery.
The orange mixer, packed separately, produces a wet foam over a wide area. Useful for car exteriors etc.
4.8.
To change the mixer, remove the pump head and remove the mixer along with the pick up tube (fig.2).
4.9.
Insert the replacement mixer into the pump head (fig.2) and insert the pick up tube.
fig.3