Declaration of Conformity
We, the sole importer into the UK, declare that the product
s
listed here
are
in conformity with the following EEC standards and directives
The construction files for th
ese
product
s are
held by the Manufacturer and may be inspected on request by
contacting Jack Sealey Ltd
For Jack Sealey Ltd. Sole importer into the UK of Sealey
Quality Machinery
SHOT BLASTING CABINET
Models: SB951 & SB972
89/336/EEC
Low Voltage Directive (S.I. 1989/728)
89/336/EEC EMC Directive (S.I. 1992/3073).
93/68/EEC CE Marking Directive
EN50081-1 Generic emission standard
EN55014 Limits and methods of measurement of
radio disturbances characteristics of household
electrical appliances, portable tools and similar
electrical apparatus.
7th February 2000
Signed by Mark Sweetman
PROBLEM
POSSIBLE CAUSE
REMEDY
Excessive dust in the cabinet
1 Exhaust vent or air flow is blocked.
1 Clean rear vent and keep vent away from any wall.
2 Abrasive media is worn.
2 Replace the media
3 Too much abrasive media in the cabinet
3 Remove excess media
4 loose air line or fittings
4 Check and tighten all air fittings.
Uneven blasting
1 Too much abrasive media in cabinet.
1 Remove excess media.
2 Moisture inside cabinet
2 Check air line for moisture.
inadequate speed or efficiency of blast
1 Abrasive media is worn
1 Replace the media
2 Pressure is too low
2 Check there are no supply blockages or leaks.
Control valve is fully open. Increase pressure.
Static electricity
Dry weather conditions
Leave the workpiece to stand for a while
Blast pattern too wide or ineffective
Nozzle blocked or worn
Check, unblock or replace nozzle
6. TROUBLESHOOTING
SB951, SB972 - 0016 - (1) - 070200
01284 757500
E-mail:
01284 703534
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof
of which will be required for any claim.
INFORMATION:
Call on 01284 757525 for a copy of our catalogue. Leave your full name, address & postcode.
Sole UK Distributor,
Sealey Group
, Bury St. Edmunds, Suffolk.
