background image

INSTRUCTIONS FOR:

COMPRESSORS 270ltr VERTICAL BELT 

DRIVE 5.5 / 7.5 / 3PH 2-STAGE WITH CAST

CYLINDERS

MODEL No: 

SACV42755B,SACV52775B

  1.  SAFETY

1.1  

ELECTRICAL SAFETY 

 

  

WARNING! 

ELECTRICAL INSTALLATION OF COMPRESSOR TO A 3-PHASE 415VOLT SUPPLY MUST ONLY BE   

 

CARRIED OUT BY A QUALIFIED ELECTRICIAN. 

 

Make sure the power supply cable is correctly connected to the earth. It is the user’s responsibility to read, understand and  

 

comply with the following: 

 

You must check all electrical equipment and appliances to ensure they are safe before using. You must inspect power supply leads,    

 

plugs and all electrical connections for wear and damage. You must ensure the risk of electric shock is  minimised by the installation of  

 

appropriate safety devices. An RCCB (Residual Current Circuit Breaker) should be incorporated in the main distribution board.  

 

You must

 also read and understand the following instructions concerning electrical safety. 

1.1.1. The 

Electricity At Work Act 1989

 requires all portable electrical appliances, if used on business premises, to be tested by a qualified   

 

electrician, using a Portable Appliance Tester (PAT), at least once a year.

1.1.2. The 

Health & Safety at Work Act 1974

 makes owners of electrical appliances responsible for the safe condition of the appliance and  

 

the safety of the appliance operator. 

If in any doubt about electrical safety, contact a qualified electrician.

1.1.3.  Ensure insulation on all cables and the product itself is safe before connecting to mains power supply. 

1.1.4.  Ensure that cables are always protected against short circuit and overload.

1.1.5.  Regularly inspect power supply, leads, plugs and all electrical connections for wear and damage, especially power connections, to    

 

ensure that none are loose. 

1.1.6. 

Important:

 

Ensure the voltage marked on the product is the same as the electrical power supply to be used. A three phase plug must  

 

be fitted to this machine.

1.1.7. 

DO NOT

 pull the powered appliance by the power cable. 

1.1.8. 

DO NOT

 pull power plugs from sockets by the power cable.

1.1.9. 

DO NOT

 use worn or damage leads, plugs or connections. Replace immediately or have repaired by a qualified electrician. 

                                                                                

 

                                                                                

GUIDE TO SYMBOLS

Original Language Version

 © Jack Sealey Limited

SACV42755B,ASACV45775B   Issue: 1 - 17/12/14

SACV42755B

SACV42775B

Warning: 

Electricity

Warning: 

Hot Surface

Warning:  

Automatic start-up

Wear ear protection

Read the instruction manual before use

DO NOT

 open the air cock before an air hose is attached

DO NOT

 operate the compressor with enclosure

displaced

Ensure oil level is 

correct before first use

IMPORTANT:

 

PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT 

CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL 

INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these 

instructions and properly maintained, give you years of trouble free performance.

Содержание SACV52775B









Отзывы: