1.3. GENERAL
SAFETY
Familiarise yourself with the application and limitations of the compressor.
Ensure the compressor is in good order and condition before use. If in any doubt
DO NOT
use the unit and contact an electrician/
service
agent.
WARNING!
Compressor must only be serviced by an authorised agent.
DO NOT
tamper with, or attempt to adjust, pressure
switch or safety valve.
DO NOT
drill, weld or deform the compressed air tank.
Before moving, or maintaining the compressor ensure it is unplugged from the mains supply and that the air tank pressure has been
vented.
Maintain the compressor in good condition and replace any damaged or worn parts. Use genuine parts only. Unauthorised parts may
be dangerous and will invalidate your warranty.
Read the instructions relating to any accessory to be used with this compressor. Ensure the safe working pressure of any air
appliance used exceeds compressors output pressure. If using a spray a gun, check that the area selected for spraying is provided
with an air change/ventilation system.
Ensure the air supply valve is turned off before disconnecting the air supply hose.
Move the compressor on a pallet or using slings beneath receiver near to domed ends, employing a fork lift truck or wheeled gantry
crane. Beware of off centre loads.
Use the compressor in a well ventilated area and ensure it is placed on a firm surface.
Keep tools and other items away from the compressor when it is in use, and keep area clean and clear of unnecessary items.
Ensure the air hose is not tangled, twisted or pinched.
Keep children and unauthorised persons away from the working area.
DO
NOT
disassemble compressor for any reason. The unit must be checked by qualified personnel only.
DO
NOT
use the compressor outdoors, or in damp, or wet, locations.
DO
NOT
operate within the vicinity of flammable liquids, gases or solids.
DO
NOT
touch the compressor cylinder, cylinder head or pipe from head to tank as these may be hot.
DO
NOT
use this product to perform a task for which it has not been designed.
DO
NOT
deface the certification plate attached to the compressor tank.
DO
NOT
cover the compressor or restrict air flow around the unit whilst operating.
▲
DANGER! DO NOT
direct the output jet of air towards people or animals.
DO
NOT
operate the compressor without an air filter.
DO
NOT
allow anyone to operate the compressor unless they have received full instructions.
WARNING!
The air tank is a pressure vessel and the following safety measures apply:
DO
NOT
tamper with the safety valve,
DO NOT
modify or alter the tank in any way and
DO NOT
strap anything to the tank.
DO
NOT
subject the tank to impact, vibration or to heat and
DO NOT
allow contact with abrasives or corrosives.
Drain condensation from tank daily.
WARNING!
If an electrical fuse blows, ensure it is replaced with an identical fuse type and rating.
When not in use, store the compressor carefully in a safe, dry, childproof location.
2. INTRODUCTION
Heavy-duty 3-phase compressor suitable for the professional workshop. Triple cylinder pump system coupled with a 7.5hp motor maximizes
performance to keep running costs low compared to single stage, single phase models. Pump features heavy-duty full cast cylinders, capped
by alloy heads for improved heat dissipation and long-life. Heavy-duty drive guards protect belt and
fl
ywheel that is designed to force air over
the pump to aid cooling. Supplied with full CE certi
fi
cation, test certi
fi
cates and operating/maintenance manual. Includes a drain valve for
easy release of condensed water build-up in the tank.
3. SPECIFICATION
Model No: ...........................................................SAC32775B
Air Displacement cfm(L/min): ..................................29.7(840)
Maximum Free Air Delivery cfm(L/min): ..................26.2(742)
Maximum Pressure: ......................................... 145psi(10bar)
Minimum Rated Supply: ...................................................32A
Motor Output: ................................................................ 7.5hp
Outlet: .......................................................................1/2”BSP
Phase: .............................................................................. 3ph
Receiver Capacity: ......................................................... 270L
Size (W x D x H): ................................ 1500 x 620 x 1080mm
Speed: ....................................................................... 970rpm
Supply: ...........................................................................415V
4. ASSEMBLY
Unpack the product and check contents. Should there be any damaged or missing parts contact you supplier immediately.
Refer to attached parts list.
Save the packing material for future transportation of the compressor. We recommend that you store the packing in a safe location,
at least for the period of the guarantee. Then, if necessary, it will be easier to send the compressor to the service centre.
SAC32775B Issue 1 31/03/22
Original Language Version
© Jack Sealey Limited
fi
g.2
fi
g.3
fi
g.4
