WARNING!
Disconnect wrench from air supply before
changing accessories, servicing or performing maintenance.
Replace or repair damaged parts.
Use genuine parts only.
Un-authorised parts may be dangerous and will invalidate the
warranty.
5.1. If the air system does not have an oiler, lubricate the air
wrench daily with a few drops of Sealey air tool oil dripped into
the air inlet to prolong its life.
5.2. Clean the wrench after use. DO NOT use worn or damaged
sockets.
5.3. Loss of power or erratic action may be due to the following:
a)
Excessive drain on the air line. Moisture or restriction
in the air pipe. Incorrect size or type of hose connectors.
To remedy check the air supply and follow instructions in
section 3.
b
) Grit or gum deposits in the wrench may also reduce
performance. If your model has an air strainer (located in
the area of the air inlet), remove the strainer and clean it.
Flush the wrench out with gum solvent oil or an equal
mixture of SAE No 10 oil and paraffin.
Allow to dry before use.
5.4. For a full service contact your local Sealey service agent.
5.5. When not in use, disconnect from air supply, clean wrench and
store in a safe, dry, childproof location.
5. MAINTENANCE
fig 3
Twist to change direction
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
Original Language Version
SA632, SA633 Issue: 2 - 27/10/09
