DO NOT use any additional force upon the
wrench in order to remove a nut.
DO NOT allow wrench to free run for an
extended period of time as this will shorten its
life.
WARNING!
Disconnect wrench from air supply
before changing accessories, servicing or
performing maintenance.
Replace or repair damaged parts.
Use genuine parts only. Unauthorised parts may
be dangerous and will invalidate the warranty.
5.1.
If the air system does not have an oiler lubricate
the air wrench daily with a few drops of Sealey air
tool oil dripped into the air inlet.
5.2.
Clean the wrench after use.
DO NOT use worn or
damaged sockets.
5.3.
Loss of power or erratic action may be due to the
following:
a)
Excessive drain on the air line. Moisture or restriction in the air pipe. Incorrect size or
type of hose connectors. To remedy, check the air supply and follow instructions in
Section 3.
b
) Grit or gum deposits in the wrench may also reduce performance. Remove the strainer,
clean it and flush the wrench out with gum solvent oil or an equal mixture of SAE No 10
oil and paraffin. Allow to dry before use.
5.4.
For a full service contact your local Sealey service agent.
5.5.
When not in use, disconnect from air supply, clean wrench and store in a safe, dry,
childproof location.
fig.4
EXHAUSTS
5. MAINTENANCE
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
Original Language Version
SA297 Issue:4(SP) 13/06/13
© Jack Sealey Limited
