6. QUESTIONS & ANSWERS
QUESTION
AnSWER
How many jump
starts can a fully
charged roadstart
do before needing to
be recharged?
Between 1 and 20 depending upon
operating factors such as temperature,
general condition of the vehicle, engine type
and size.
can the roadstart
be recycled?
Yes, in accordance with national and local
authority regulations.
What is the ideal
in-use storage
temperature
of the roadstart?
room temperature. the roadstart will also
operate at temperatures below zero, its
power however will be lessened. Intense
heat will activate self-discharge.
I have a regular 10
amp battery charger,
can I use it to
recharge the
roadstart?
no. only the supplied adaptor and charger
can be used.
Is the roadstart fool
proof?
no. All jump starting instructions must be
followed carefully.
can I replace the
internal batteries?
Yes, but note that the batteries are not
covered by warranty as they are
consumable items
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
iMPORTAnT:
no liability is accepted for incorrect use of this product.
WARRAnTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
inFORMATiOn:
for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park
,
Bury st. Edmunds, suffolk,
IP32 7Ar
www.sealey.co.uk
Web
Original Language Version
rs1.V4, rs102.V3, rs103.V2, rs104.V2, rs105.V2 Issue: 5 - 06/01/12
Environmental Protection
recycle unwanted materials instead of disposing of them
as waste.
All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner
which is compatible with the environment.
When the product is no longer required, it must be
disposed of in an environmentally protective way.
contact your local solid waste authority for recycling
information.
Battery Removal
Removal
1. Place the roadstart unit front side down.
2. remove the 14 screws holding the casing together and
lift off the back half of the unit.
3. Disconnect the wires from the two battery terminals,
taking care to avoid accidental arcing of the terminals.
4. Lift the batteries out of the front half of the casing.
Disposal
1. take the battery to a recycling centre that handles
sealed, lead-acid batteries.
2. If there is no recycling centre in the area, contact the
local environmental agency for disposal instructions.
Dispose of batteries according to local authority
guidelines
.
under the Waste Batteries and Accumulators regulations 2009,
Jack sealey Ltd are required to inform potential purchasers of
products containing batteries (as defined within these regulations),
that they are registered with Valpak’s registered compliance
scheme.
Jack sealey Ltd’s Batteries Producer registration number (BPrn)
is BPrn00705
