Sealey Group, Kempson Way, Suffolk business park, bury St Edmunds, Suffolk. Ip32 7AR
01284 757500
01284 703534
www.sealey.co.uk
ENVIRONMENt pROtECtION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Original Language Version
© Jack Sealey Limited
7. tROUbLESHOOtING
problem
Cause
Remedy
Jack will not lift to full height
Oil level low
Check/top up oil level
Jack will not hold the load
Release valve not closed
Contact authorised service agent
Hydraulic jack oil is contaminated
Pump valves not sealing
Lift arm will not lower
Cylinder ram binding
Contact authorised service agent
Parts worn
Internal component damage
Broken or unhooked return spring
Lift arm linkage either bent or binding
Jack feels spongy when lifting
System requires purging
Refer to air purge procedure at section 4.3
RJA1550.V2 | Issue:3 (1,F) 22/01/19
