PROBLEM
CAUSE
SOLUTION
Breaking blades
Motor will not
operate
Vibration
Blade run-out
1) Incorrect tension
2) over-worked blade
3) Wrong blade
4) twisting blade with workpiece
1) Power supply fault
2) Motor fault
1) Mounting or mounting surface
2) loose table
3) loose motor
1) Blade holder(s) misaligned
1) Adjust blade tension.
2) feed workpiece more slowly.
3) use narrow blades for thin workpieces, wide blades for thick.
4) Avoid side pressure, or twist, on blade.
1) check power supply and fuses.
2) contact local authorised service Agent.
1) ensure mount bolts are tight. the more solid the surface the
less the vibration.
2) tighten table lock knob and pivot screws.
3) tighten motor mounting screws.
1) loosen blade holder screw(s) and realign.
6. TROUBLESHOOTING
5. MAINTENANCE
5.1.
Keep table clean to give easy and smooth movement of workpiece.
5.2.
every 50 hours of use oil the lower arm bearings with sAe20 oil. Access bearings from rear of machine.
WARNING! Ensure you read, understand and apply the safety instructions in Section 1.
If you have no experience of using a scroll saw, it is recommended that you practice until you have familiarised yourself with the
applications, limitations and hazards of the saw.
Keep alert. DO NOT allow familiarity (from frequent use) to cause a careless mistake. Remember, a careless second is sufficient
to inflict damage or serious injury.
4.1.
set blade to front or side cutting as required, set table angle, adjust guard to just clear workpiece (so that fingers cannot touch blade)
and align blower tube to keep cut line visible.
4.2.
Plug saw into mains power and switch on.
4.3.
Workpiece may now be guided
slowly
into the blade taking care to keep the workpiece pressed down firmly onto the table. do not
bend or twist the blade as this will cause it to break.
4. OPERATION
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
no liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park
,
Bury st. edmunds, suffolk,
IP32 7Ar
www.sealey.co.uk
Web
Original Language Version
sM43.V3 Issue: 5 - 07/01/10
