sealey group, Kempson Way, suffolk business Park, bury st edmunds, suffolk. iP32 7ar
01284 757500
01284 703534
www.sealey.co.uk
enVironmenT ProTeCTion
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Weee regulaTions
dispose of this product at the end of its working life in compliance with the eU directive on Waste electrical and electronic equipment
(Weee). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important
: no liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Parts support is available for this product. To obtain parts, please log on to
www.sealey.co.uk, email [email protected] or telephone 01284 757500
4.2.
The DeTergenT boTTle
4.2.1.
The detergent bottle can be removed by unscrewing from the
nozzle body.
4.2.2.
When filled with appropriate detergent, screw the bottle in place.
4.2.3.
The detergent flow has three settings; off, spray and jet (fig,7).
4.2.4.
When the detergent has been exhausted, remove the bottle, empty
and refill with neat detergent.
4.3.
PaCKing The PumP aWay
4.3.1.
Remove any attachments from the end of the hose.
4.3.2.
To disconnect the hose, pull back the outer sleeve on the
connector.
4.3.3.
drain the hose.
4.3.4.
drain any equipment. dispose of detergents according to
manufacturers instructions.
4.3.5.
Make sure the equipment is dry before storing it.
5. mainTenanCe
5.1.
The pump unit does not require any regular maintenance
5.2.
The 12V connector lead is fitted with an 8A fast blow cartridge fuse in the accessory socket. If blown, re-place with identical fuse.
5.3.
Should the nozzle become blocked, run the nozzle cleaning tool through gently to remove any deposits.
5.4.
When disconnected from the hose, the nozzle can be back-flushed with either water or air to dislodge any blockage.
5.5.
When not in use drain the machine, remove hoses and store in a cool yet frost proof location beyond the reach of children.
fig.6
fig.7
fig.5
PW12CC Issue 1 13/12/18
Original Language Version
© Jack Sealey limited
