2. INTRODUCTION
C
ordless and lightweight welding iron. Inbuilt LED to illuminate welding area in low light areas such as engine bays. Kit includes plastic
welding tip, plastic welding with pipe guide tip, hot staple tip, plastic welding rods in ABS/PP/PE/PS, 3 pcs of reinforcing mesh, 50 pcs 0.8mm
flat staples and 50pcs 0.6mm flat staples as well as USB charging lead and safety stand. Heats up to a max temperature of 500°C.
3. CONTENTS
4. SPECIFICATION
MODEL NO: ...............................................................SDL14
Battery: ...............................................................
2.4Ah Li-ion
C
harging Time: ...............................................................
3.5hr
M
aximum Temperature:
...............................................
500°C
Operating Time: ...........................................................
40min
P
ower Rating: .................................................................
50W
5. OPERATION
5.1.
TESTING MATERIALS TO BE WELDED:
5.1.1.
Most adhesion failures are due to the incorrect matching of materials. The welding rod therefore must be of the same material as
the item to be welded. For instance, most car body parts are made of ABS material.
Some manufacturers however, use different plastics in their products. To test, snip off a piece of material from the work to be
welded and proceed as follows:
fig.1
fig.2
S
DL14 Issue 1 28/04/20
Original Language Version
© Jack Sealey Limited
