WARNING!
Disconnect buffer from air supply before changing accessories, servicing or
performing maintenance .
Replace or repair damaged parts .
Use genuine parts only. Un
authorised parts may be dangerous and will invalidate the warranty.
5 .1 . Lubricate the buffer daily with a few drops of Sealey air tool oil dripped into the air inlet to
prolong its life .
5 .2 . Clean the buffing kit after use . DO NOT use damaged stone wheels .
5 .3 . Loss of power or erratic action may be due to the following:
a)
Excessive drain on the air line . Moisture or restriction in the air pipe . Incorrect size or
type of hose connectors . To remedy check the air supply and follow instructions in
chapter 3 .
b
) Grit or gum deposits in the buffing kit may also reduce performance . If your model has
an air strainer (located in the area of the air inlet), remove the strainer and clean it . Flush
the buffer out with gum solvent oil or an equal mixture of SAE No 10 oil and paraffin .
Allow to dry before use .
5 .4 . For a full service contact your local Sealey service agent .
5 .5 . When not in use, disconnect from air supply, clean buffer and store in a safe, dry,
childproof location .
5. MAINTENANCE
Risk of Hand Arm Vibration Injury.
The SA99 .V2, when operated in accordance with these instructions and tested in accordance with EN 28662-2: 1994 results in
the following vibration emission declared in accordance with BS EN12096: 1996 .
Measured vibration emission value: . . . . . . . . . . . . . . . . . . . . 1 .9m/s²
Uncertainty: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 .76m/s²
These values are suitable for comparison with emission levels of other tools that have been subject to the same test.
This tool may cause hand-arm vibration syndrome if its use is inadequately managed.
Recommended Measures to reduce risk of hand-arm vibration syndrome:
This item represents a low Hand Arm Vibration
risk to users . The calculated maximum usage period exceeds 8 hours . We recommend appropriate safety equipment is utilised
and regular breaks for the operator are employed to reduce any residual risk of fatigue or repetitive strain injury .
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product .
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim .
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode .
01284 757500
01284 703534
sales@sealey .co .uk
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St . Edmunds, Suffolk,
IP32 7AR
www .sealey .co .uk
Web
Original Language Version
SA92 .V2 Issue: 2 - 13/11/09
