5. MAINTENANCE & STORAGE
6. DECLARATION OF CONFORMITY
WARNING! Before attempting maintenance or inspection vent any pressure remaining in the hose.
to ensure reliable operation, clean the hose and casing regularly.
DO NOT
spray or wet the product, but clean with a damp cloth and warm
water.
DO NOT
use solvents or detergents, as these may permanently damage the item.
the hose reel does not require special maintenance as it is lubricated for life. If the product needs to be opened, consult your nearest
authorised service agent.
WARNING: DO NOT attempt to loosen, or remove, any casing screws yourself.
replacement of the supply hose should be carried out by skilled personnel only, consult your nearest authorised service agent.
STORAGE:
Should you wish to store the air hose, ensure it is clean and dry. Place the item in a dark, safe, dry, childproof location, where the temperature
will remain reasonably stable.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this equipment.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
www.sealey.co.uk
Web
SA821, SA822, SA823 & SA824
Issue No: 1 - 12/05/08
4.1.
Extending the hose.
4.1.1. Pull the hose out slowly to the length required, release the tension and the hose should lock into position, if it starts to retract then pull
the hose out slightly further to engage the locking mechanism of the reel.
4.2.
Retracting the hose.
4.2.1. to release the hose and allow it to automatically rewind, pull the hose out from the locked position and then release the tension on the
hose.
WARNING!
the reel tension is factory set, if any adjustment is required contact an authorised service agent.
4. OPERATION
Declaration of Conformity
We, the sole importer into the uK, declare that the product listed here is in conformity with the
following standards and directives.
the construction files for this product is held by the
manufacturer and may be inspected, by a national
authority, upon request to Jack Sealey Ltd.
Signed by Mark Sweetman
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products.
Auto Rewind Control Air Hose Reels
Models: SA821, SA822, SA823 & SA824
93/68/EEc cE Marking Directive
12th May 2008