PCB35 - 1 - 170504
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this equipment.
WARRANTY:
Guarantee is 12
months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and
promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
E-mail:
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
Web address: www.sealey.co.uk
5
4
3
2
3
2
1
3.3. CHANGING THE BLADE (Part number PCB35/B)
3.3.1. Rotate the black spring retaining lever in the handle so
that the hook retracts from the spring eyelet thus
releasing the spring. (See fig.1-A).
3.3.2 Hold the cutter with the head facing downwards so
that gravity will assist the blade out. Depress the
handle repeatedly to extend the blade as far as
possible. (See fig.2-B) Ease the blade outwards until
the spring is visible then disconnect the spring using
thin nosed pliers. (See fig.2-C) Remove the spring
making note of its orientation for reassembly.
3.3.3 Slide the blade carefully out of the top of the tool as
shown in fig.3-D.
3.3.4 Slide the new blade partway into the tool as shown in
fig.4-E. With the eyelet flat to the blade, slide the
spring into the body of the tool and reconnect the
hooked end of the spring into the circular hole in
the blade. (See fig.4-F).
3.3.5 Depress the trigger handle and retraction button
simultaneously and ease the new blade back into
the body of the tool. (See fig.4-E)
3.3.6 When the spring reappears adjacent to the black
spring retaining lever (See fig.5-H) rotate the lever so
that the hook re-engages with the spring eyelet. ( I )
PCB35 - 1 - 170504
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this equipment.
WARRANTY:
Guarantee is 12
months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and
promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
E-mail:
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
Web address: www.sealey.co.uk
5
4
1
3.3. CHANGING THE BLADE (Part number PCB35/B)
3.3.1. Rotate the black spring retaining lever in the handle so
that the hook retracts from the spring eyelet thus
releasing the spring. (See fig.1-A).
3.3.2 Hold the cutter with the head facing downwards so
that gravity will assist the blade out. Depress the
handle repeatedly to extend the blade as far as
possible. (See fig.2-B) Ease the blade outwards until
the spring is visible then disconnect the spring using
thin nosed pliers. (See fig.2-C) Remove the spring
making note of its orientation for reassembly.
3.3.3 Slide the blade carefully out of the top of the tool as
shown in fig.3-D.
3.3.4 Slide the new blade partway into the tool as shown in
fig.4-E. With the eyelet flat to the blade, slide the
spring into the body of the tool and reconnect the
hooked end of the spring into the circular hole in
the blade. (See fig.4-F).
3.3.5 Depress the trigger handle and retraction button
simultaneously and ease the new blade back into
the body of the tool. (See fig.4-E)
3.3.6 When the spring reappears adjacent to the black
spring retaining lever rotate the lever so that the hook
re-engages with the spring eyelet.
pcb35 pipe cutter.qxd 6/10/2004 08:56 Page 2