Before activating the trigger, GRIP the gun firmly to counteract the recoil from the high pressure water jet.
WARNING!
Avoid sudden bursts of water as these will cause water pressure to drop and put extreme pressure on hoses and
connectors.
If, during operation, power failure occurs turn the electricity and water off for safety reasons, (See Note ‘c’ at end of Section 4).
WARNING!
The high pressure jet will cause loose particles to be propelled at high speed, which may cause serious injury.
WARNING!
DO NOT
operate the machine without a water supply. Dry running can seriously damage the unit.
WARNING! DO NOT
leave the washer switched on for more than 15 minutes without operating the trigger.
DO NOT
obstruct ventilation grills during operation.
DO NOT
use the washer with flammable or toxic liquids or any other product. Use only recommended detergent. Unapproved
detergents may corrode the machine cover and accessories.
DO NOT
jam the trigger in the operating position.
DO NOT
adjust any internal control valves, as they have been factory set.
DO NOT
connect other appliances to the machine inlet or outlet.
DO NOT
use in damp or wet weather conditions.
DO NOT
move the unit by pulling the hoses or electrical cables. Use the handle.
DO NOT
touch plug with wet hands. To avoid the risk of electrocution keep all connections dry and off the ground.
DO NOT
direct jet against yourself, other persons, animals, electrical equipment or the machine itself.
DO NOT
use washer if you are tired or under the influence of alcohol, drugs or intoxicating medication.
DO NOT
allow children or untrained persons to operate the washer.
WARNING!
Discharge residual pressure before disconnecting the washer hose. Pressure left in unit may cause injury.
After use, disconnect washer from electrical mains and water supply and store in a safe, dry, childproof area.
3. CONTENTS & SPECIFICATION
Unpack the product and check contents against the list below. Also check that the machine has an identification plate or label. If label or parts
are damaged or missing contact your supplier immediately.
3.1. SPECIFICATION
Model No.
. . . . . . . . . . . . . . . . . . .
PC3451
Maximum Pressure . . . . . . . . . . . . . 140bar
Manifold Pressure . . . . . . . . . . . . . . 110bar
Effective Cleaning Power . . . . . . . 3450psi
Water Flow . . . . . . . . . . . . . . . . . . 450ltr/hr
Motor Power . . . . . . . . . . . . . . . . . . 2000W
Input Voltage/Current . . . . . . . . 230V/8.7A
Max. Inlet Temp. . . . . . . . . . . . . . . . . . 40
o
C
Hose Length . . . . . . . . . . . . . . . . . . . . 8mtr
Weight . . . . . . . . . . . . . . . . . . . . . . . . . 20kg
Heavy-duty induction motor unit produces enough power to pump 450 litres of water every hour. Unit features Automatic Total Stop System
(TSS) which switches the motor on and off when the lance trigger is operated, prolonging the motor life. Supplied with 8mtr hose reel,
Variable Spray Nozzle and Rotablast Nozzle® which helps develop the same Effective Cleaning Power (ECP) as a 3450psi washer. Includes
integral detergent tank with detergent flow control valve and holder for extra 5ltr tank. Suitable for a wide range of automotive, industrial,
agricultural, marine and domestic applications.
2. INTRODUCTION
1
High Pressure Gun
2
Rotablast Turbo Nozzle with Lance
3
Lance
4
Variable Spray Jet Nozzle
5
Hose Connector
6
High Pressure Hose
7
Pressure Washer Body
8
Water Inlet Filter
9
Inlet Quick Connector
10
Trigger Lock
11
Water Outlet
12
Water Inlet
1 3
Accessory Holder
14
Handle
15
Hose Reel
16
On / Off Switch
17
Detergent Tank Holder
(Tank not supplied)
18
Detergent Tank (Integral)
fig.1
Original Language Version
PC3451 Issue: 2 - 01/06/11
