8.5. After each cleaning operation, make sure that the filter on the end of the detergent pick-up pipe is
not clogged. If it is, remove it and rinse under running water (Fig 19).
8.6. If dirt has deposited on the inside of the spray head assembly, remove the clear plastic cover (Fig
20), by unscrewing it, and rinse off with clean water. Refit when thoroughly dry.
8.7. The air outlet filters should be replaced regularly; to remove the cover, insert a coin into the slot
and carefully prise the cover off. After replacing the filter, refit the cover, ensuring the arrow on the
inside is pointing upwards (Fig 21).
Fig 19
Fig 20
Fig 21
9. MAINTENANCE
WARNING!
Before doing any maintenance ALWAYS disconnect the power supply.
9. 1. After wet vacuum cleaning, empty the contents of the drum. Clean and dry the drum and accessories to avoid scaling.
9. 2.
Periodically check to ensure that the machine and accessories are not blocked or damaged and are in good working order.
Damaged parts must be replaced. Blocked hoses or tubes will impair performance and may damage the machine.
Such damaged units returned for repair will not be accepted under warranty and may incur expensive repair bills.
Never use machine as a dry cleaner without the cloth filter. Dirt in the motor will cause failure and also invalidate warranty.
9. 3. Clean the dry cloth filter at regular intervals in a suitable container full of light soapy water (DO NOT use solvents).
Allow to dry before use. Check the filter condition and replace if necessary.
THE PROBLEM
THE CAUSE
THE SOLUTION
Unit does not start.
Low suction.
No current. Power cable, switch, or motor
faulty. Tank may be full of water.
Check the plug and fuse. Repair or replace faulty part. Empty
tank if full.
Container full.
Filter obstructed.
Outlet filter obstructed.
Hose or tool blocked.
Empty container.
Clean or replace filter.
Clean or replace.
Check and remove obstruction.
Empty container.
Clean or replace filter.
Check and remove obstruction.
Foam comes out of air
filter.
Container full.
Filter obstructed.
Hose or tool blocked.
Motor speed
increases.
Wrong detergent used.
Used on carpet previously cleaned with
foaming detergent.
Use only SEALEY “VM” or SORMATOP.
Add SEALEY VMR922 anti-foaming agent to dirty water tank.
10. TROUBLESHOOTING
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
Original Language Version
PC320.V2 Issue: 2 - 13/01/10
