Sealey MT680.V2, Инструкции, Страница: 2 / 3

4. oPeratinG inStructionS
4.1 Prior to use
note! Mt680 has a vent valve fig.3a, this is closed for transit only; before use the valve must be lifted or the pump will not
function properly.
4.1.1 Let the hydraulic pump stand for one hour, to allow the oil to settle, before purging the system.
note: Failure to allow sufficient time for the oil to settle could result in air remaining in the oil. Should the pump fail to purge completely
at the first attempt, a second purge will be required.
4.1.2 Purge the hydraulic system by depressing the release foot pedal (34) and pumping the lift foot pedal (32) fifteen to twenty times.
4.1.3 Test the lift unladen by moving the safety handle (47) to the right and raising the lift to full height.
4.1.4 Move the safety handle to the left (in the depression) and lower the lift by depressing the release foot pedal (34) slowly, to control the
rate of descent.
4.2 operation (refer to the Parts diagram)

WarninG! Ensure that you read, understand and apply the Section 1 Safety Instructions.

WarninG! do not overload the Vehicle lift. The maximum load is 680kg.
4.2.1 Position the lift in a suitable location, preferably on a concrete surface.
4.2.2 Turn the locking plate base (27) down to ensure that lift is level and stable on the surface.
4.2.3 Wheel the vehicle up the leading plate and on to the lift platform.

WarninG! The vehicle must be fully supported by the lift platform prior to lifting. do not put the rear wheel of the vehicle
on the leading plate (9) and do not use the leading plate to support the weight of the vehicle when lifting. The leading plate (9)
is only used to assist the operator in wheeling the vehicle on the platform when the lift is at its lowest position.
4.2.4 Secure the vehicle securely to the lift platform. When working on a motorcycle, wheel the bike in to the wheel clamp at the front of the
lift, tighten the clamp to hold the bike in place.
Original Language Version
MT680.V2 Issue: 2 - 17/11/10
Vent ValVe
location
fig 3.a
VENT IN TRANSIT
POSITION
OPEN VENT
BEFORE USE
01284 757500
01284 703534
sales@sealey.co.uk
www.sealey.co.uk
Web
email
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including
postcode.
MODEL:
MINI TRACTOR / QUAD / MOTORCYCLE LIFT
YANKEE 680KG HYDRAULIC
MODEL:
MT680.V2
ITEM PART NO DESCRIPTION
1 MT680.01 PLATFORM
2 MT680.V2-02 CRANK HANDLE ASS'Y
3 MT680.V2-03 WHEEL CLAMP
4 MT680.V2-04 BAFFLE PLATE
5 MT680.V2-05 BOLT
6 MT680.V2-06 BOLT
7 MT680.V2-07 M10 FULL HEX NUT BZP
8 MT680.V2-08 SLIDING PLATE
9 MT680.V2-09 LEADING PLATE
10 MT680.V2-10 LOCK PLATE ASS'Y
11 MT680.V2-11 BOLT
12 MT680.V2-12 WASHER
13 MT680.V2-13 BASE ASS'Y
14 MT680.V2-14 STEEL WHEEL
15 MT680.V2-15 LIFTING ARM 1
16 MT680.V2-16 BOLT
17 MT680.V2-17 LIFTING ARM 2
18 MT680.V2-18 BOLT
19 MT680.V2-19 M16 NYLOC NUT S/C
20 MT680.V2-20 M8 SPRING WASHER BZP
21 MT680.V2-21 WASHER
22 MT680.V2-22 M16 SPRING WASHER BZP
23 MT680.V2-23 M16 FULL HEX NUT BZP
24 MT680.V2-24 ADJUSTING SCREW
25 MT680.V2-25 FOOT
26 MT680.V2-26 SAFETY LATCH
27 MT680.V2-27 LOCKING PLATE BASE
ITEM PART NO DESCRIPTION
28 MT680.V2-28 CYLINDER
29 MT680.V2-29 OIL HOSE
30 MT680.V2-30 COUPLER
31 MT680.V2-31 PUMP
32 MT680.V2-32 LIFT FOOT PEDAL
33 MT680.V2-33 FOOT PEDAL PAD
34 MT680.V2-34 RELEASE FOOT PEDAL
35 MT680.V2-35 M6 NYLOC NUT BZP
36 MT680.V2-36 BOLT
37 MT680.V2-37 BOLT
38 MT680.V2-38 WASHER
42 MT680.V2-42 BOLT
43 MT680.V2-43 M8 NYLOC NUT BZP
44 MT680.V2-44 SCREW
45 MT680.V2-45 M10 NYLOC NUT BZP
46 MT680.V2-46 M12 FULL HEX NUT BZP
47 MT680.V2-47 SAFETY HANDLE
48 MT680.V2-48 SAFETY WIRE
49 MT680.V2-49 PIN
50 MT680.V2-50 WASHER
51 MT680.V2-51 SIDE EXTENSION (RIGHT)
51A MT680.V2-51A SIDE EXTENSION (LEFT)
52 MT680.V2-52 EXTENSION PANEL PIPE
53 MT680.V2-53 RAMP EXTENSION (RIGHT)
53A MT680.V2-53A RAMP EXTENSION (LEFT)
54 MT680.V2-54 M12 FULL HEX NUT BZP
Issue: 1
Issue Date: 171110
fig 3.