Sealey MIGHTYMIG90.V2 Скачать руководство пользователя страница 6

 7.  TROUBLESHOOTING

01284 757500

01284 703534

[email protected]

Sole UK Distributor, Sealey Group, 

Kempson Way, Suffolk Business Park

Bury St. Edmunds, Suffolk,

IP32 7AR

www.sealey.co.uk

NOTE:

 It is our policy to improve products continually and as such we reserve the right to alter data, specifications and component parts without 

prior notice.

IMPORTANT: 

No liability is accepted for incorrect use of this product. 

WARRANTY: 

Guarantee is 12 months from purchase date, proof of which will be required for any claim. 

Environmental Protection

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, 

taken to a recycling centre and disposed of in a manner which is compatible with the environment.

When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable) into 

approved containers and dispose of the product and the fluids according to local regulations.

WEEE Regulations

Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and 

Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally 

protective way. Contact your local solid waste authority for recycling information.

MIGHTYMIG90.V2  Issue: 1 - 15/02/17

Original Language Version

 © Jack Sealey Limited

Содержание MIGHTYMIG90.V2







Отзывы: