background image

5.  OPeratiON

5.1.    

connecting the tester

  

 

5.1.1.   

Before testing make sure the battery terminals are really clean as grease and dust could lead to errors in the test results.

5.1.2. 

  

If the battery is still fitted to a motorcycle, make sure that all the electronics are off, and that the ignition is turned off. 

5.1.3.   

the red clip is connected to the positive electrode and the black clip is connected to the negative electrode.

5.1.4. 

  

Ensure that the clips have a firm, secure grip on the battery terminals.

5.1.5.   

if the tester has a poor connection it will not be able to boot up. if this happens clean the battery terminals.

5.2.    

Product set Up

5.2.1.   

connect tester as above.

5.2.2.   

Press enter to scroll to main menu.

main menu

1. Quick test

2. Battery in Vehicle

3. out of Vehicle

4. review data

5. Print data

6. system setup

  

5.2.3.   

Press down key to scroll down to system setup, press enter.

system setup

1. language

2. contrast

3. tool information

  

5.2.4.   

select language, press enter.

main menu

1. english

2. danish

3. norwegian

4. Polish

5. romanian

 

5.2.5.   

select language required, press enter.

5.2.6.     reselect system setup, select contrast.

5.2.7.   

use up and down button to select contrast value, press enter to save selection and return to previous menu.  

5.2.8.   

select tool information by pressing enter, press exit to return to main menu.

5.3.    

Quick test

5.3.1.   

the Quick test can check the following: Voltage, ccA electronic resistance, rated ccA, charging value, health value. input the AH  

 

value which is marked on the battery label. 

5.3.2. 

  

Press up/down key to select the Quick test, press enter to confirm.

main menu

1. Quick test

2. Battery in Vehicle

3. out of Vehicle

4. review data

5. Print data

6. system setup

  

5.3.3.   

input the rated battery capacity- xxAH. in general , the battery capacity for 12V motorcycles is below 30AH.

input AH value

               8 A-H

    Please input A-Hr value 

    on the battery label.

  

5.3.4.   

Press enter key to start test. the test result will show one of these as below. Battery test result has 1 of 5 outcomes as below:  

 

good battery

Healthy:96%           110ccA

charge:98%            12.54V

internal r=24.66m

Ω

rated:125A

Good BAtterY

 

there is no problem with the battery and is ok to use.

 

 mc105 | issue:1  23/11/16

Original Language Version

© Jack sealey limited

Содержание MC105










Отзывы: