9
Keep hands away from the moving parts of the log splitter.
9
Keep hands away from splits and cracks which open in logs. They may close suddenly and crush or cut off parts of your hands.
Warning!
ensure power is switched off before attempting to clear jammed logs.
9
For this reason do not attempt to remove jammed logs by hand. A jammed log is a log which is only partially split and continues to grip
the splitting wedge. See section 6.5 for instruction on removing jammed logs.
1.5.
saFety oF otHers
8
Do not
allow another person to help you with a jammed log.
9
Keep children and unauthorised persons away from the work area.
9
The log splitter must always be operated by one person only. other people must keep a safe distance from the log splitter especially
when it is in operation.
9
Store the log splitter in a safe area away from children and other people not qualified to use the log splitter.
1.6.
general saFety
8
Do not
make any modifications to the log splitter.
8
Do not
leave the machine unattended when running.
8
Do not
exceed the stated log capacity of the log splitter.
8
Do not
use the log splitter for a task it is not designed to perform.
8
Do not
leave the log splitter until the splitting wedge has returned to the start position.
8
Do not
force the log splitter to work beyond its specified capacity.
9
ensure that there are no nails, screws or other foreign objects in logs to be split.
9
The end of logs should be cut square
9
logs should not be of an irregular shape.
Warning!
The warnings, cautions and instructions referred to in this manual cannot cover all possible conditions and situations that
may occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be
applied by the operator.
2. introDuction
Safe and easy way to split logs, offering continuous sizing and up to 6tonne of pressure. Adjustable wedge allows workpiece to be as
near to wedge as possible minimising splitting time. Features a two hand safety operation, twin pull-in and push-down levers. Fitted
with new Ce standard guard.
3. speciFication
model no: ....................................................................ls550v
Tier log lengths .................................................. 100 - 550mm
maximum log diameter ................................................300mm
maximum log length ....................................................550mm
minimum log diameter ...................................................80mm
minimum log length .....................................................100mm
Vertical Ram Travel .......................................................
495mm
4. unpacKing anD contents
4.1.
unpacKing
4.1.1.
At least two people will be required to unpack the log splitter as it is very heavy.
4.1.2.
Select a flat and clear area in which to work preferably at or near the working location for the splitter.
4.1.3.
ensure the package is the correct way up (see labelling on package). Tip over at 45 degrees whilst fully supporting it (suggest against
a wall and chock) and open it at the wheels/base end of the log splitter. Return the package to the upright position and rotate it through
180 degrees. Repeat the opening process.
4.1.4.
With the package in the upright position, carefully slide the packaging up and off the log splitter.
4.2.
CONTENTS(fig.1)
Original Language Version
© Jack Sealey limited
item no. Description
quantity
1
log splitter frame
1 off
2
Control lever and guard assy.
1 off
3
Adjustable log holder
2 parts
4
Retainer 1 and Retainer 2
1 each
5
W
heels
2 off
6
Support table
1 off
7
H
ardware bag (see figs.2, 4, and
5 for content details)
1 off
fig.1
maximum load Pressure ..............................................
6tonne
motor Power: ......................................................
3000W - 230V
o
verall (W x L x H):
.................................
915 x 840 x 1495mm
l
S550V Issue 2 (2) 02/10/19