4. operation
4.1.
charging
4.1.1.
Lift rubber cover and connect micro USB cable to socket on rear of handle (fig2).
4.1.2.
The unit has 3 LEDs to indicate charge level (fig.2). Whilst charging the LEDs will
flash. Once fully charged all LEDs will be permanently lit.
4.2.
lighting modes
4.2.1.
The unit has four lighting modes, LED, COB, COB Dimmer or Off. To select LED
press and hold Mode Selector switch (fig.1). To change to COB mode press and hold
mode Selector once more. To dim CoB mode rotate mode Selector switch to achieve
desired light level. To turn unit off, press and hold Mode Selector once more.
Original Language Version
© Jack Sealey limited
sealey group, Kempson Way, suffolk business park, bury st edmunds, suffolk. ip32 7ar
01284 757500
01284 703534
www.sealey.co.uk
environment protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important
: no liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Weee regulations
dispose of this product at the end of its working life in compliance with the eU directive on Waste electrical and electronic equipment
(Weee). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
fig.1
fig.2
ledFleXG Issue 1 21/01/19
