4. oPErATion
4.1.
Before first use, unscrew the battery compartment screw cap (fig.1) and remove the white disc from beneath the contact.
4.2.
Unscrew USB cover to reveal USB charging point, where the provided USB charging cable can be inserted (fig.2).
4.3.
Plug in the cable to an appropriate power source. Charging will take approximately 4hrs.
4.4.
When charged remove USB cable and screw closed the USB cover (fig.1).
4.5.
To switch on press on/mode/off button (base of torch), press again to change mode, press again to switch off (fig.1).
4.6.
Focus can be adjusted spotlight to wide angle by twisting head of torch (fig.1).
5. mAinTEnAncE
5.1.
Keep the torch clean by wiping with a damp cloth.
5.2.
Remove batteries if not being used for a long period of time.
5.3.
Store torch and batteries in a dry childproof area.
Original Language Version
© Jack Sealey limited
sealey group, Kempson Way, suffolk business Park, bury st Edmunds, suffolk. iP32 7Ar
01284 757500
01284 703534
www.sealey.co.uk
EnvironmEnT ProTEcTion
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
WEEE rEgulATions
dispose of this product at the end of its working life in compliance with the eU directive on Waste electrical and electronic equipment
(Weee). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
bATTEry rEmovAl
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack
Sealey ltd’s Batteries Producer Registration number (BPRn) is BPRn00705.
note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
important
: no liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Parts support is available for this product. Please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500
fig.1
fig.2
led449 | Issue:5 (1,2) 17/05/2019
