Sealey LED360F Series Скачать руководство пользователя страница 2

3.  specification

 

model no....................................................led360f series

 

Battery.......................................................7.4V 4.4Ah li-ion

 

led Quantity.............................................................72smd

 Power............................................................................36W

 

lumen  output(High/medium/low).............3000/1500/750lm  

 

operating time (High/medium/low)....................1.5/2.5/5hr

 

colour temperature...................................................6500K

 

charging time..............................................................4.5hr

 

iP rating.......................................................................iP65

 

The battery fitted to this lamp is considered to be a consumable item 

 

and its ability to accept a charge will reduce over time. We will provide

  

warranty against mechanical and electrical defect for a period of one

  

year - this does not cover fair wear and tear. if the battery is not

  

properly charged before first use, or regularly conditioned, its capacity

  

will diminish. under these circumstances we will not replace the 

 

battery regardless of whether it is less than one year old. 

 note: 

the lithium battery does not suffer from memory effect and

  

once fully charged may be stored for up to six months without another

  

charge. 

4.  operation

4.1.    

remove connection cover located on the rear of the light just below red on/off button. connect charging lead to the socket in the   

 

back of light. connect charger to power supply, switch on power supply. the battery will begin charging, full charge will be reached  

 

in approx. 4.5hrs. the three led lights show the state of charge of the battery when the light is on. switch off remove charger and  

 

replace cover. (A usB port is also position next to the charging connection so that the battery can be used as a powerbank.)

4.2.    

direct the lens away from your eyes before switching on. 

4.3.    

Press on/off button once for low, twice for medium and three times for high lumens output.

4.4.    

the lamp can swivel through 360° and be tilted.

Original Language Version

© Jack sealey limited

led360f series | issue 1 25/04/17

NOTE: 

It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

important:

 no liability is accepted for incorrect use of this product.

warranty:

 Guarantee is 12 months from purchase date, proof of which will be required for any claim.

sole uK distributor, sealey Group.

Kempson Way, suffolk Business Park,

Bury st. edmunds, suffolk.

iP32 7Ar

www.sealey.co.uk

[email protected]

01284 757500

01284 703534

environmental protection

recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be 

sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.

When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)

into approved containers and dispose of the product and the fluids according to local regulations.

weee regulations

dispose of this product at the end of its working life in compliance with the eu directive on 

Waste electrical and electronic equipment (Weee). When the product is no longer required, it must be disposed

of in an environmentally protective way. contact your local solid waste authority for recycling information.

battery removal

remove the 6 hex screws on the back of the lamp. remove the back casing remove the 4 screws holding cir-

cuit board and remove board. remove 4 screws holding battery housing remove battery cells and disconnect 

wires. dispose of according to local government guidelines

.

under the Waste Batteries and Accumulators regulations 2009, Jack sealey ltd are required to inform potential 

purchasers of products containing batteries (as defined within these regulations), that they are registered wih Valpak’s 

registered compliance scheme. Jack sealey ltd’s Batteries Producer registration number (BPrn) is BPrn00705.

parts support is available for this product. to obtain a parts listing and/or diagram, 

please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500.

Отзывы: