background image

3.  specification

model no ..............................................................led360.V3

Battery ........................................................3.7V 2.2Ah li-ion

led Quantity ................................................. 10smd + 1led

lumen output side(High/low)top ............... (400/200)/120lm

operating time side(High/low)/top ......................... (3/6)/8hr

charging time ...................................................................4hr

iP rating .........................................................................iP54

minimum length ......................................................... 260mm

maximum length ........................................................ 280mm

 

The battery fitted to this lamp is considered to be a consumable item and its ability to accept a charge will reduce over time.  

 

 

We will provide warranty against mechanical and electrical defect for a period of one year - this does not cover fair wear and tear. 

 

If the battery is not properly charged before first use, or regularly conditioned, its capacity will diminish. Under these circumstances  

 

we will not replace the battery regardless of whether it is less than one year old. 

 note: 

the lithium battery does not suffer from memory effect and once fully charged may be stored for up to six months without    

 

another charge. 

4.  operation

4.1.    

connect the usB lead to the charger unit and the socket on the rear of the lamp. Plug into power supply and turn on, the charging  

 

led on the lamp will light red to show that charging has commenced.

4.2.    

When the battery has fully charged the led will turn Green.

4.3.    

direct the lens away from your eyes before switching on. 

4.4.    

toggle the lamp between the end light and side light using the on/off switch. 

4.5.    

the lamp may be suspended by the hooks or attached to any ferrous surface by using the magnets. 

4.6.    

When the light is hanging from the hook it can be rotated through 360° for more precise positioning.

4.7.    

separate the top and bottom sections by pulling apart. When attached to a ferrous surface, using the base magnet, the lamp can 

 

rotate to shine in any direction.

charging socket

Original Language Version

© Jack sealey limited

led360.V3 | issue 1 25/07/16

Отзывы: