background image

CORDLESS 24 SMD + 7 LED LITHIUM-ION 

RECHARGEABLE INSPECTION LAMP

Model no: 

L

ED307.V2

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  SAfETy

1.1.    GENERAL

 

9

   ensure the lamp is fully charged before initial use.

 

8

  

DO NOT

 turn the lamp on when it is being charged.

 

8

  

DO NOT

 shine directly into your, other person’s or animal’s eyes.

 

8

  

DO NOT 

allow children to use the lamp.

 

8

  

DO NOT

 handle or move the lamp whilst it is being charged.

 

8

  

DO NOT

 use the lamp if you suspect that the battery or the lamp casing is damaged.

 

8

  

DO NOT

 leave battery in a discharged state, recharge battery immediately. Before storage, fully recharge the battery, subsequently   

  recharge the battery at least once every six months of non-use.

1.2.    

ELECTRICAL SAfETy fOR USE Of CHARGER. 

  

USE ONLY THE SUPPLIED CHARGER PLUG FOR CONNECTING LAMP TO THE POWER SUPPLY.

 

‰

  

WARNING!

 It is the user’s responsibility to read, understand and comply with the following electrical instructions:

 

 

You must ensure the risk of electric shock is minimised by the installation of appropriate safety devices. 

 

 

An RCCB (Residual Current Circuit Breaker) should be incorporated in the main distribution board. We also recommend that an RCd  

 

 

(Residual Current device) is used with all electrical products, particularly portable equipment which is plugged into an electrical supply  

 

 

not protected by an RCCB.

 

 

you must

 also read and understand the following instructions concerning electrical safety.

1.2.1.   

The Electricity At Work Act 1989

 requires all portable electrical appliances, if used on business premises, to be tested by a qualified  

 

electrician, using a Portable Appliance Tester (PAT), at least once a year.

1.2.2.   

The Health & Safety at Work Act 1974 

makes owners of electrical appliances responsible for the safe condition of the appliance  

 

and the safety of the appliance operator. 

If in any doubt about electrical safety, contact a qualified electrician.

1.2.3.   

you must ensure that you:

 

9

   Inspect the charger plug, cable and connector for wear and damage to ensure items are safe before connecting to the mains power   

  supply. If worn or damaged 

DO NOT

 use.

 

9

  

Important:

 Check that the voltage marked on the charger plug is the same as the lamp.

 

9

   Uncoil the cable between charger and the lamp.

 

8

  

DO NOT

 pull the charger plug from the mains socket by the lead.

 

‰

  

WARNING! DO NOT use any other type of charger with this product, other than the supplied mains or car charger. failure to    

  observe this warning could result in injury and or fire and will invalidate the warranty.

 

8

  

DO NOT

 try to take the charger plug apart.

 

8

  

DO NOT

 use the charger plug to charge or power any other electrical item.

 

8

  

DO NOT

 get the charger wet, or use in wet, damp conditions (for indoor use only).

1.3   

Battery Safety

 

‰

  

WARNING

! To reduce the risk of burns or fire:

 

8

  

DO NOT

 Attempt to open, disassemble, modify or service the battery pack.

 

8

  

DO NOT

 

Crush, puncture, short external contacts or dispose of in fire or water.

 

8

  

DO NOT

 expose to temperatures above 60°C (140°).

 

9

   Replace only with the battery pack designated for this product.

 

9

   Recycle or dispose of used battery as stipulated by local regulation.

 

9

   If the electrolyte in the cells gets on your skin, thoroughly wash with soap and water. If it gets in your eyes, rinse thoroughly with cool  

  water and seek immediate medical attention.

2.  INTRODUCTION

Heavy-duty housing features 37 super bright leds. 30 leds Used as an inspection lamp or 7 leds in the end for use as a directional torch. 

360° Hanging hook and magnet on rear of lamp for hands-free applications. Single led battery indicator. Supplied with 12V in-car charger and 

mains charger. Available with Schuko plug, order Model no. led307eU.

led307.V2 Issue 3 (HF) 17/07/18

Original Language Version

© Jack Sealey limited

Refer to 

instructions

Отзывы: