4. charging
4.1.
the battery fitted to this lamp is considered to be a consumable item and its ability to accept charge will reduce over time. We will
warranty it against mechanical and electrical defect for a period of one year, this does not cover fair wear and tear. if the battery is not
properly charged before first use, or regularly conditioned, its capacity will diminish. under these circumstances we will not replace the
battery even if it is less than one year old.
4.2.
connect the charger into the charge socket on the lamp. Plug into power supply and turn on.
4.3.
When the battery has fully charged (approx 5.5hrs) disconnect from mains supply.
note: the lithium battery does not suffer from memory effect and once fully charged may be stored for up to six months without another
charge.
5. operation
5.1.
open the light to the required angle.
5.2.
Position the floodlight in the area that requires illumination.
5.3.
this led floodlight develops minimal heat and is not subject to the same restrictions that apply to halogen lamps that become too hot to
touch. We do however recommend that the floodlight should not be placed in cramped or restrictive situations and recommend the
following minimum distances between the light and any surface/object.
● 500mm minimum between the top of the light and any overhead surface, or objects.
● 200mm between sides of light and end or side walls, surfaces or objects.
● 1 metre minimum between the front of the light and any object to be illuminated.
5.4.
to operate press button on top of light, 50% illumination, press again 100% illumination, press again single lamp economy mode, press
again for off.
5.5.
the charge remaining in the battery is indicated by the battery charge indicator (four lights fully charged, one light low charge).
warning!
ensure the light is disconnected from the mains power supply when not in use ensure that the unit is cool and dry and
is stored in a cool, dry, childproof area.
6. Maintenance
6.1.
clean the casing externally (
not the glass
) with a moist cloth.
8
do not
use solvents or abrasives.
6.2.
if necessary clean the glass with alcohol and a soft cloth.
l
ED190T | Issue1 24/05/16
Original Language Version
© Jack sealey limited
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
iMportant:
no liability is accepted for incorrect use of this product.
warrantY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
sole uK distributor, sealey Group.
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7Ar
www.sealey.co.uk
01284 757500
01284 703534
web
environmental protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment.
weee regulations
dispose of this product at the end of its working life in compliance with the eu directive on Waste electrical and electronic
equipment (Weee). When the product is no longer required, it must be disposed of in an environmentally protective way.
contact your local solid waste authority for recycling information.
battery removal
remove the 4 screws on the back of the lamp. remove the back casing and disconnect the wiring.
remove screws to remove the battery. dispose of according to local government guidelines.
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential
purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s
registered compliance scheme. Jack sealey ltd’s Batteries Producer registration number (BPrn) is BPrn00705.
parts support is available for this product,
please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500.