3. CHARGING
4. OPERATION
4.1.
Direct the lens away from your eyes before switching on. Operate the
lamp by pressing the ON/OFF switch at the rear of the lamp body
(Fig.2A). Press the ON/OFF switch once for NORMAL power and
twice for FULL power.
4.2.
Suspend the lamp by the hook. When the light is hanging from the
hook it can be rotated through 360° for more precise positioning.
4.3.
Alternatively use the integral magnet to attach the lamp to any
ferrous metal surface.
IMPORTANT WARRANTY INFORMATION:
The battery fitted to this cordless tool is considered to be a
consumable item and its ability to accept charge will reduce over time.
We will warranty it against mechanical and electrical defect for a period
of one year - this does not cover fair wear and tear. If the battery is not
properly charged before first use, or regularly conditioned, its capacity
will diminish. Under these circumstances we will not replace the
battery even if it is less than one year old.
Note:
Fully charge the lamp before first use.
Note:
The Lithium battery does not suffer from memory effect and once fully
charged may be stored for up to six months without another charge.
3.1.
Connect the charger into the charge socket on the side of the lamp
(fig.1A). Plug into power supply and turn on, the charging LED
(fig.1B) on the lamp will light RED to show charging has commenced.
3.2.
When the battery has fully charged the LED will flash GREEN/RED.
Environmental Protection.
Recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which is
compatible with the environment.
When the product is no longer required, it must be disposed of in
an environmentally protective way.
Battery Removal
Remove the 6 screws on the back of the lamp. Remove the back
casing, and disconnect the wiring to the charger port and from
the battery to the circuit board. Dispose of battery according to
local government guidelines.
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
Original Language Version
LED026EU Issue: 1 - 27/07/12
Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to
www.sealey.co.uk, email [email protected] or phone 01284 757500.
fig.1
fig.2
Under the Waste Batteries and Accumulators Regulations 2009, Jack
Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are
registered with Valpak’s registered compliance scheme.
Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is
BPRN00705
© Jack Sealey Limited
