VIew oF PRoBLem
PoSSIbLE REASon FoR PRobLEM
SoLuTIon
Dried material in a dirty side port restricts passage of air.
Greater flow of air from the cleaner side port forces a fan
pattern in the direction of the clogged side.
Dissolve material in the side ports with solvent, then
blow the gun clean. Do not poke into the opening with
metal instruments.
Dried material around the outside of the fluid nozzle tip
restricts the passage of atomizing air at one point
through the centre opening of the air nozzle and results
in the pattern shown. This pattern can also be caused
by a loose air nozzle.
Remove the air nozzle and wipe off fluid tip using a rag
dampened with solvent. Tighten the air nozzle.
Material too thin or atomization air pressure too high.
Regulate material viscosity or reduce air pressure.
Dirt between the fluid nozzle seat and body or loosely
installed fluid nozzle will cause the gun to spit.
Remove the fluid nozzle, clean the back of the nozzle
and the nozzle seat in the gun body using a rag damp-
ened with thinner. Replace the nozzle and secure it
tightly against the body.
Atomised air flowing through the paint channel to pot.
The paint nozzle is not tight enough. Air nozzle is not
completely screwed in.
Tighten, clean or replace parts accordingly.
6. TROUbLESHOOTING
A faulty spray is usually caused by improper cleaning or dried material around the fluid nozzle tip or in the air nozzle. Soak these parts in a solvent
that will soften the dried material and remove with a brush or a cloth. never use metal instruments to clean the air or fluid nozzles. These parts are
carefully machined and any damage will cause a faulty spray. If either the air nozzle or fluid nozzle is damaged, these parts must be replaced
before a perfect spray can be achieved.
Material bubbles or 'boils' in paint cup.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
no liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk business Park
,
bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
Original Language Version
HVLP746 Issue: 1 - 05/09/11
fig.7
