PROBLEM
CAUSE
SOLUTION
Fluid flow is too high for the quantity
of air flow.
Paint is too thin.
Air entering the paint supply
One of the horn holes blocked (A).
In order to check, turn the air cap
180
O
, if the faulty pattern is now
reversed the hole must be cleaned.
Possible paint build-up between fluid
nozzle and air cap (A).
1. Reduce paint flow by screwing in the fluid control knob.
2. Paint could be too thick, in which case dilute it.
1. Increase proportion of paint to thinning medium
1. Tighten the connection between the gun and the cup.
2. Tighten fluid nozzle with gun spanner.
3. Check whether paint pot is empty.
1. Place the air cap in cleaning solution.
2. Clean hole with compressed air or with a soft probe.
DO NOT use a metal probe which will damage the hole.
1. Clean the air cap and the fluid nozzle, check also that they
match correctly.
2. Check needle for damage.
8. TROUBLESHOOTING
9. DECLARATION OF CONFORMITY
Poor atomization, heavy centre pattern
Heavy atomization, poor centre pattern
Heavy right or left side pattern
Top heavy or bottom heavy pattern
Intermittent spray pattern
HVLP2002 - 2 - 160502
01284 757500
E-mail:
01284 703534
Sole UK Distributor,
Sealey Group,
Bury St. Edmunds, Suffolk.
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts
without prior notice.
IMPORTANT:
No responsibility is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your name and address, including post code.
Signed by Mark Sweetman
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products.
Declaration of Conformity
We, the sole importer into the UK, declare that the product listed here is in conformity with the following
standards and directives.
The construction file for this product is held by the
manufacturer and may be inspected, by a national authority,
upon request to Jack Sealey Ltd.
Spray Gun System
Model HVLP2002
73/23/EEC Low Voltage Directive
89/336/EEC EMC Directive
93/68/EEC CE Marking Directive
14th January 2002