7.4.1 Place both panels item 3B and 11B on your work table and join them together with the 10mm long self tapping
screws. See the pre-punched holes.
7.4
ASSEMBLE THE ROOF PANEL
GSS150815 Issue: 1 - 24/08/12
7.4.2 Fit top and bottom channels item 39A and 39B to panels by firstly sliding and finally tapping into place as
previously explained in 7.1.3. Note that the smaller flange on the channels should always be adjacent to the
outside face of the panel. The outside face is the top face in both diagrams.
© Jack Sealey Limited
Original Language Version
