background image

 

WARNING!

 

Disconnect drill from air supply before changing accessories, servicing or 

 

performing maintenance.

 

Replace or repair damaged parts. 

Use genuine parts only.   

 

Unauthorised parts may be dangerous and will invalidate the warranty.

5.1.

  If the air system does not include an oiler, lubricate the drill daily with a few drops of Sealey  

 

air tool oil dripped into the air inlet. 

5.2.

   Clean the drill after use. 

5.3.

   Loss of power or erratic action may be due to the following: 

 

a)

  Excessive drain on the air line. Moisture or restriction in the air pipe. Incorrect size or

 

  type of hose connectors. To remedy, check the air supply and follow instructions in 

 

  Section 3. 

 

b)

  Grit or gum deposits in the drill. If your model has an air filter (located in the area of the  

 

  air inlet), remove and clean it. Flush the  drill out with gum solvent oil or an equal mixture  

 

  of SAE No 10 oil and paraffin.  Allow to dry before use.

5.4.

  For a full service contact your local Sealey service agent. 

5.5.

  When not in use, disconnect from air supply, clean and store in a safe, dry, childproof  

 location.

4.3.

  Connect the drill to the air hose as in Section 3.

4.4.

  The drill direction is changed by switching the reverse lever behindthe trigger formside to  

 

side. Check that the drill is set to operate in the required direction.

4.5.

  To adjust the position of the side handle loosen the sleeve directly above thegripwith an  

 

18mm spanner. Rotate the grip to the position required and retighten.

4.6.

  Depress the trigger to operate the drill. 

 

DO NOT

 allow drill to free run for an extended period of time as this will cause accelerated  

 wear.

5. MAINTENANCE

NOTE:

 It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: 

No liability is accepted for incorrect use of this product. 

WARRANTY: 

Guarantee is 12 months from purchase date, proof of which will be required for any claim. 

INFORMATION:

 For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

01284 757500

01284 703534

[email protected]

Sole UK Distributor, Sealey Group, 

Kempson Way, Suffolk Business Park

Bury St. Edmunds, Suffolk,

IP32 7AR

www.sealey.co.uk

Web

email

Original Language Version

GSA27  Issue:3(SP)-31/07/13

 © Jack Sealey Limited

Содержание GSA27

Страница 1: ...bit is secure in the chuck Avoid unintentional starting Keep children and unauthorised persons away from the work area DO NOT hold the workpiece by hand Use clamps or a vice to secure the workpiece DO NOT use the drill for a task it is not designed to perform WARNING DO NOT use drill if damaged or thought to be faulty Contact your local service agent DO NOT use drill unless you have been instructe...

Страница 2: ...ges Check hose for wear and make certain that all connections are secure 3 2 Couplings Vibration may cause failure if a quick change coupling is connected directly to the drill To overcome this connect a leader hose to the drill A quick change coupling may then be used to connect the leader hose to the air line recoil hose See figs 1 2 3 PREPARING DRILL FOR USE 4 OPERATING INSTRUCTIONS WARNING Ens...

Страница 3: ...n 4 3 Connect the drill to the air hose as in Section 3 4 4 The drill direction is changed by switching the reverse lever behindthe trigger formside to side Check that the drill is set to operate in the required direction 4 5 To adjust the position of the side handle loosen the sleeve directly above thegripwith an 18mm spanner Rotate the grip to the position required and retighten 4 6 Depress the ...

Страница 4: ... operating pressure in the air supply The user should ensure that the pressure is set in accordance with our recommendations to assure optimum efficiency and minimise vibration exposure Ensure that the tool is correctly aligned to the work Misalignment increases the risk of vibration injury Ensure that consumables are selected maintained and replaced in accordance with Sealey Instructions Sleeve f...

Отзывы: