Fig. 1
Fig. 2
6. MaINTENaNCE
6.1. Cleaning.
Keep the tool ventilation slots clean and free from obstructions. If available, blow compressed air into the vents to clear any
internal dust. safety goggles
MUST
be worn when undertaking this process.
Keep the drill outer case clean and free from grease. Wipe it down with a damp cloth.
DO NOT
wash with water or use solvents or abrasives.
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500.
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. all tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
WEEE Regulations
Dispose of this product at the end of its working life in compliance with the EU Directive on
Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed
of in an environmentally protective way. Contact your local solid waste authority for recycling information.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTaNT:
no liability is accepted for incorrect use of this product.
WaRRaNTy:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMaTION:
for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park
,
Bury st. edmunds, suffolk,
IP32 7Ar
www.sealey.co.uk
Original Language Version
© Jack sealey limited
e540.V3 Issue: 1 - 17/04/14
