5. OPERATION
5.1. LIFTING A DRUM
5.1.1. Turn the discharge lever (fig.1&10) fully clockwise to lower the hydraulic ram.
5.1.2. Move the truck to bring the retaining bracket and retaining plate in contact with the drum.
5.1.3. Depress the castor brake pedal to secure the unit in place (fig.11).
5.1.4.
Repeatedly depress the pump handle to raise the lifting frame so that the drum is between the clamp tooth and the retaining plate (fig.12).
5.1.5. Ensure that the retaining plate rests below the top rim of the drum as in (fig.12). Pull the clamp tooth operating lever (fig.13) towards you.
5.1.6. Ensure that the clamp tooth (fig.12) securely holds the drum.
5.1.7. Continue depressing the pump handle until the drum is off the ground.
5.2. TRANSPORTATION
WARNING:
Ensure that the drum position is as low as possible prior to moving the truck.
5.2.1. Pull/push the pump handle to move the raised drum. Turn the handle to change direction.
5.3. RELEASING A DRUM
WARNING:
To avoid damage to the truck or the drum
DO NOT
turn the discharge lever rapidly.
5.3.1. SLOWLY turn the discharge lever (fig.1&10) anticlockwise and lower the drum until it stands firmly on the ground. Push the clamp tooth
operating lever (fig.13) away from you to release the clamp tooth.
6. MAINTENANCE
6.1.
Regularly check the truck chassis and front wheels for rigidity.
6.2.
Ensure that the rear castor is firmly secured to the chassis.
6.3.
Regularly check the clamp tooth for wear. Replace when necessary.
6.4.
Regularly check the truck’s connecting components such as retaining pins, nuts and washers for
lubrication and/or wear.
6.5.
If the performance of the unit degrades, it may be necessary to top up the oil, see lubrication
point (fig.14). If performance is not improved, it may be necessary to bleed the system, see
bleed point (fig.14).
DH01.V3 | Issue 1 08/01/2019
Original Language Version
© Jack Sealey Limited
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Parts support is available for this product. Please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500
fig.6
fig.7
fig.8
fig.9
fig.14
fig.10
fig.13
fig.12
fig.11
