NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
Sole UK Distributor, Sealey Group.
K
empson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk.
I
P32 7AR
www.sealey.co.uk
01284 757500
01284 703534
Web
5. MAINTENANCE
5.1.
Disconnect from power supply before carrying out maintenance.
5.2.
Empty dustbin periodically to avoid vacuum cleaner failure.
5.3.
Clean the vacuum with water or mild detergent (wring the wash cloth out before cleaning to prevent water from entering the vacuum).
5.4.
The vacuum is completely sealed at the time of manufacture. Attempting to open it may result in damage to the unit.
5.5.
If any repair is required return to your Sealey Dealer.
6. TROUBLESHOOTING
Problem
Possible Cause
Solution
Vacuum cleaner does not
work.
P
lug is not connected to the power supply or
the plug has a poor contact with the
Accessory socket.
Check vehicle power supply or plug in again.
P
ower switch is not on.
Check and make sure switch is on.
Blown fuse.
Replace 10A fuse located in front end of
plug.
Suction power is low.
T
oo much dust in filter and dustbin.
E
mpty dustbin, clean filter refer to section
4.8.
Low battery power.
Charge or replace car battery.
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500.
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
WEEE Regulations
Dispose of this product at the end of its working life in compliance with the EU Directive on
Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed
of in an environmentally protective way. Contact your local solid waste authority for recycling information.
Battery Removal
Refer to section 4.7
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential
purchasers of products containing batteries (as defined within these regulations), that they are registered with
Valpak’s registered compliance scheme. Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is
BPRN00705.
C
PV100 | Issue 1 09/04/15
Original Language Version
© Jack Sealey Limited