Sealey CP20VTP Скачать руководство пользователя страница 4

C

P20VTP   Issue 1   25/10/21

Original Language Version

© Jack Sealey Limited

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

 01284 757500 

 01284 703534 

 [email protected] 

 www.sealey.co.uk

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to 
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely 
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids 

according to local regulations.

BATTERY REMOVAL

Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products 
containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack 
Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705.

Note

: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior 

notice.

Important

: No Liability is accepted for incorrect use of this product.

Warranty

: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Содержание CP20VTP

Страница 1: ...empt recharging the battery by means of an engine generator or a DC power source WARNING Dispose of spent batteries correctly as they contain Lithium ion DANGER DO NOT attempt to disassemble the battery For safety and environmental reasons DO NOT discard in domestic waste or by burning ONLY discard or recycle according to local authority regulations WARNING DO NOT allow a leaking battery to contac...

Страница 2: ...TING STOPPING THE TOOL 4 4 1 To start the tool press the lock button fig 4 in and pull the trigger switch fig 4 upwards towards the handle 4 4 2 To stop the tool release the trigger switch fig 4 WARNING Before attaching the battery cartridge to the tool firstly check that the trigger switch returns to the OFF position when released WARNING DO NOT use the tool if it can be started without pressing ...

Страница 3: ... of the telescopic pole so that the tool head can be inserted Push the head home fig 11 making sure the electrical contacts at the end of both components are aligned correctly telescopic pole contact fig 8 tool head contact fig 9 7 1 2 Tighten the attachment locking nut to secure both components together fig 10 7 1 3 To separate again reverse sections 7 1 1 and 7 1 2 8 SHOULDER HARNESS 8 1 Securel...

Страница 4: ...to approved containers and dispose of the product and fluids according to local regulations BATTERY REMOVAL Under the Waste Batteries and Accumulators Regulations 2009 Jack Sealey Ltd are required to inform potential purchasers of products containing batteries as defined within these regulations that they are registered with Valpak s registered compliance scheme Jack Sealey Ltd s Batteries Produce...

Отзывы: