20V Cordless Air PumP - Body only
Model no:
CP20VAP
Thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. sAfeTy
WArninG!
Read operation instructions before use.
8
do noT
leave the unit unattended while in operation.
9
Check capacity and maximum inflation pressure of inflatable before commencing inflation.
9
Monitor the pressure gauge while in operation.
9
The gauge should be used as an indication of pressure only. We recommend the use of a dial pressure gauge for definitive reading.
WArninG!
This compressor is capable of producing a high pressure.
8
do noT
inflate any item beyond its maximum capacity.
8
do noT
direct inflation hose connector head at yourself, others or animals.
8
do noT
carry by the hose, or yank the hose from an inflation valve.
8
do noT
get the compressor wet or use in the rain.
8
do noT
use the compressor for a task it was not designed to perform.
8
do noT
operate the compressor if any parts are missing as this may cause failure or possible personal injury.
8
do noT
open the unit.
9
Keep children and non essential persons away from the inflation area.
9
Keep the compressor clean and in good condition.
9
Avoid bending the hose during inflation.
9
Turn off the pump immediately if overheating or any abnormality is observed during operation.
9
If no preset pressure value,
do noT
leave the pump unattended during inflation to prevent the air pressure getting too high.
9
Keep the pump away from any flammable or combustible objects during operation, since the built-in DC motor may generate sparks
during operation.
9
Keep the pump away from moisture, sand and shock.
8
do noT
store the pump in extremely cold or hot places. That will shorten product life, damage battery, or deform the structural.
9
Avoid using strong chemicals or detergents to clean the product.
8
do noT
disassemble the product.
do noT
throw the product into fire or household waste.
8
do noT
let children use the product.
8
do noT
insert the hose into mouth, ears,or eyes of humans or animals. It must not be used as a toy.
9
This compressor is not designed for continuous use. Operation over an extended period of time will overheat the unit and damage
the compressor. It should not be used continuously for more than 30 minutes. After 30 minutes, turn it off and let it cool for 15
minutes before resuming operation.
2. inTroduCTion
Handheld cordless tyre inflator. Digital LED display. Pressure can be set in either PSI or Bar. Automatic cut out when pre-selected
pressure has been reached. Double injection composite body with rubber grips for added comfort and vibration reduction. Supplied
with 150mm compressor hose with tyre valve, 1 ball needle, 2 bike tyre valves and 3 universal adaptors. Requires Model No’s
CP20VBP, CP20VBP2 or CP20VBP4 20V Battery and Model No. CP20VMC Mains Charger.
3. sPeCifiCATion
model no: .............................................................. CP20VAP
T
ypical Inflation Time:
........
0-30psi in 205 seconds (175/70R)
M
aximum Air Pressure:
......................................
7 bar/100psi
B
attery: ...........................
20V 2Ah - 4Ah Li-ion (not included)
C
onsumable Parts:
........................
CP20VBP2 - 2Ah Battery
.........................................................
CP20VBP - 3Ah Battery
.......................................................
CP20VBP4 - 4Ah Battery
R
eplacement Parts
.......................
CP20VMC - Mains charger
C
P20VAP Issue 1 10/12/19
Original Language Version
© Jack Sealey Limited
Refer to
instructions
fig.1
