4. MAINTENANCE
5. DECLARATION OF CONFORMITY
Cleaning
Keep the outer case of the wrench clean and free from grease. DO NOT wash with water or use solvents or abrasives.
For any other service or maintenance, contact your authorised service agent.
p
p
p
WARNING! Ensure you read, understand and apply safety instructions before use.
3.2.
USING THE WRENCH.
3.2.1. Only use impact sockets which are specifically designed for use with a impact wrench. The use of normal chrome vanadium sockets is
dangerous since these are more brittle and are liable to shatter.
3.2.2. Fit the socket to the wrench by snapping it onto the rotating head axle (fig 1.5).
3.2.3. Insert battery back in the wrench.
3.2.4. Check that the rotation direction is correct before use. To change direction, push switch (fig 1.4) to the left or right . Check this operation
before use to familiarise yourself with direction required. DO NOT change direction whilst operating trigger is depressed.
Use the same switch to de-activate the axle by place the switch in the middle (neutral) position.
3.2.5. Place the socket over the subject nut and depress the trigger (fig 1.3) to operate the wrench.
Speed of the wrench is controlled by the electronic variable speed switch. Press the switch gently for a slow speed and progressively
increase the pressure on the switch to produce correspondingly higher speeds (try before using the wrench).
01284 757500
E-mail:
01284 703534
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts
without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
Call 01284 757525 for our catalogue & promotions. Leave your full name, address & postcode.
Sole UK Distributor,
Sealey Group
, Bury St. Edmunds, Suffolk.
Declaration of Conformity
We, the sole importer into the UK, declare that the product listed below
is
in conformity with the following EEC
standards and directives.
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products
4th July 2000
Signed by Mark Sweetman
The construction file for th
is
product
is
held by the Manufacturer and may
be inspected, by a national authority, upon request to Jack Sealey Ltd.
Cordless Battery Wrench
Model CP1210/IW
Battery Charger Model CB1210
73/23/EEC LV Directive (S.I. 1994/3260)
89/336/EEC EMC Directive
CP1210/IW - 0016 - (1) - 040700
