Sealey BT2015 Скачать руководство пользователя страница 7

enVironMent proteCtion

recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to 
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely 
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids 
according to local regulations.

weee regUlations

dispose of this product at the end of its working life in compliance with the eu directive on Waste electrical and electronic equipment 
(Weee). When the product is no longer required, it must be disposed of in an environmentally protective way. contact your local solid 
waste authority for recycling information.

battery reMoVal 

see section 5.2
under the Waste batteries and Accumulators regulations 2009, Jack sealey ltd are required to inform potential purchasers of products 
containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack 
sealey ltd batteries Producer registration number (bPrn) is bPrn00705.

note

: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior 

notice.

important

: no liability is accepted for incorrect use of this product.

warranty

: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Содержание BT2015








Отзывы: