4. oPeRation
WaRninG!
The boot tool
MUSt not
be used with impact guns or drills on their hammer setting.
WaRninG!
The boot tool is designed for the installation of flexible rubber CV boots only and should be used with no other products
and for no other purpose.
4.1.
ensure that hammer action is not selected on the drill.
4.2.
Fit the hexagonal shaft into the chuck of the drill and then tighten.
4.3.
Slide the boot onto the metal fingers, large end first. Settle the boot as far as possible onto the fingers. To fit a boot to an inner joint,
turn the boot inside out before sliding it onto the fingers.
4.4.
Hold boot tool and drill firmly and operate the drill in an anticlockwise direction. There may be a slight torque reaction as the drill starts.
4.5.
let the fingers open enough to pass over the joint. Keep hands clear of moving parts.
4.6.
With the fingers open push boot tool over the CV joint. Reverse the drill and close the arms.
4.7.
Slide the boot onto the drive shaft and withdraw the boot tool, leaving the boot behind.
4.8.
detach the drill and store the boot tool and drill safely.
4.9.
Complete the boot installation in the normal way
.
5. MaintenanCe
8
Do not
attempt to clean or repair the boot tool whilst a drill is connected.
5.1.
Routine maintenance is limited to cleaning and inspection for damage.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St edmunds, Suffolk. iP32 7aR
01284 757500
01284 703534
www.sealey.co.uk
enViRonMent PRoteCtion
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important
: no liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
B
SL104 Issue 3 (3,4) 02/05/18
Original Language Version
© Jack Sealey limited
