background image

400A CCA BOOSTER CABLES 16MM² X 3M 

WITH ELECTRONICS PROTECTION

MODEL NO: 

BC16403SR

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  SAFETY        

1.1.    

PERSONAL PRECAUTIONS

 

9

   Ensure that Health & Safety, local authority, and general workshop practice regulations are adhered to when using this equipment

 

9

   Ensure that there is another person with you especially within hearing range of your voice, or close enough to come to your aid    

  should a problem arise when working near a lead-acid battery.

 

9

   Remove personal metallic items such as rings, bracelets, necklaces and watches. A lead-acid battery can produce a short-circuit   

  current high enough to weld a ring or the like to metal, which may cause severe burns.

 

9

   Ensure that hands and clothing (especially belts) are clear of fan blades and other moving or hot parts of engine, remove ties and  

  contain long hair.

 

9

   Wear safety eye protection and protective clothing. Avoid touching eyes while working near battery.

 

8

  

DO NOT

 smoke or allow a spark or flame in the vicinity of battery or engine.

 

8

  

DO NOT

 drop any metal tool onto the battery as It may spark or short circuit the battery which could cause an explosion.

 

8

  

DO NOT

 use whilst under the influence of drugs, alcohol or intoxicating medication. 

1.2. 

  

GENERAL SAFETY INSTRUCTIONS

 

‰

  

WARNING!

 Modern vehicles contain extensive electronic systems.

 

You are required to check with the vehicle Manufacturer, for any specific instructions regarding the use of this type of equipment on

 

each vehicle.

 

9

   Familiarise yourself with the application, limitations and potential hazards relating to this product. Also, refer to the vehicle  

 

 manufacturer`s 

handbook. IF IN ANY DOUBT CONSULT AN ELECTRICIAN.

 

9

   Ensure that the booster cables are in good order and condition before use. If in any doubt do not use the unit and contact an auto  

 electrician.

 

8

  

DO NOT

 dis-assemble the Booster cables for any reason. The booster cables must be checked only by qualified service personnel.

 

8

    Only use recommended attachments and parts. To use unapproved items may be dangerous and will invalidate your warranty.

 

‰

  

WARNING!

 Check that both vehicle batteries are the same voltage.

 

9

   Ensure that vehicles are not touching before attempting to use these leads.

 

9

   Keep tools and other items away from the engine, and ensure that you can see the battery and the working parts of the engine    

 clearly.

 

9

   Keep children and unauthorised persons away from the work area.

 

9

   Ensure that  the jump leads are not tangled and are clear of moving or hot engine parts.

 

8

  

DO NOT

 allow the clamps to touch each other or to make contact with the vehicle bodywork, as this may result in arcing.

 

8

  

DO NOT

 cross connect the power leads to the battery. Ensure positive is to positive and negative is to negative.

 

8

  

DO NOT

 pull the cables or clamps from the battery terminals.

 

8

  

DO NOT

 operate in the vicinity of flammable liquids or gases.

 

8

  

DO NOT

 try to jump start a frozen battery.

 

8

  

DO NOT

 use or store the booster cables in damp or wet locations.

 

8

  

DO NOT

 use this product to perform a task for which it is not designed.

 

9

   The cables may become hot with excessive use. If so, allow a few minutes for them to cool before attempting to re-use.

 

9

   If the surge protection unit receives a sharp knock or blow, the unit must be checked by a qualified service agent before next use

 

9

   When not in use, store the booster cables carefully, in the case provided,  in a safe, dry, childproof location.

2.  INTRODUCTION    

P

VC sheathed copper coated aluminium cables give maximum power transfer yet remain flexible. Resistant to oil, grease and most acids. 

Insulated heavy-duty clamps reduce the heating effect of power transfer. Features an LED display unit which shows the battery voltage and 

includes a reverse polarity indicator and alarm. In-line surge protector helps to prevent electrical spikes occurring. Additional features also 

include alternator charge check and battery condition check. Supplied in a storage case.

3.  SPECIFICATIONS

Model No.: .......................................................... BC16403SR

Cable Section: .............................................................16mm

2

Length: ............................................................................. 3m.

Capacity: ........................................................................400A

Suitable for: ................................4-8 Cylinder Petrol Engines.

BC16403SR  Issue 2 (HF) 04/11/20

Original Language Version

© Jack Sealey Limited

Refer to

Instruction

Manual

Wear Eye

Protection

Wear 

Protecitve

Gloves

Warning:

Explosive 

Risk

Warning!

Electricity

Warning!

Corrosive

Отзывы: