fig.1
fig.2
Original Language Version
BBQ05, BBQ06 Issue: 1 - 12/02/13
3. ASSeMBLY
refer to the attached Parts Diagram and List.
Assemble all nuts and bolts loosely at first. tighten all connections after completion of assembly. this makes the barbecue more stable.
When starting to assemble, take all single parts out of the box and check if anything is missing according to the parts list.
You will need an adjustable spanner, pliers and a crosshead screwdriver for assembly.
3.1
refer to fig.3
screw right leg A (11), right leg B (12), left leg A (14) and left leg B (15) to bottom shelf (16) using screws D and nuts G.
3.2
refer to fig.4
fit wheels (18) to bottom of left leg A (14) and left leg B (15) using wheel pins (A), washer (I) and pin lock (B). Push wheel caps (17)
onto centre of wheels.
3.3
refer to fig.5
fit barbecue module by screwing through the four legs into the module using screws (D).
3.4
refer to fig.6
fit left side table (6) and right side table (8). screw through bottom hole for the tables to hinge up and fix them over the top
screws to retain them in the horizontal position.
fig.3
fig.4
© Jack sealey Limited
