background image

5.  trouBLeshootINg

6.  maINteNaNce

 

‰

  

WarNINg!

 disconnect from power supply before performing any maintenance.

6.1. 

  

Cleaning and user maintenance should be carried out by competent persons.

6.2. 

  

After use and before performing maintenance, unplug and disconnect the battery charger.

6.3.    

Use a dry cloth to wipe all battery corrosion and other dirt or oil from the battery connectors, cords, and the charger case.

6.4. 

  

ensure that all of the charger components are in place and in good working condition, for example, the plastic boots on the battery  

 clips.

6.5. 

  

Servicing does not require opening the unit, as there are no serviceable parts.

6.6.    

All other servicing should be performed by qualified service personnel.

6.7. 

  

If the mains cable is damaged, 

Do Not

 use until repaired.

6.8. 

  

Store the charger unplugged. The cord will still conduct electricity until it is unplugged from the mains.

6.9. 

  

Store inside, in a cool, dry place.

 

8

  

Do Not

 store the connectors clipped together, on or around metal, or clipped to cables. If the charger is moved around the workshop  

  or transported to another location, take care to avoid/prevent damage to the cables, connectors and charger. Failure to do so could  

  result in personal injury or property damage.

sealey group, Kempson Way, suffolk Business park, Bury st edmunds, suffolk. Ip32 7ar

 01284 757500 

 01284 703534 

 [email protected] 

 www.sealey.co.uk

eNVIroNmeNt protectIoN

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to 

a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely 

unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids 
according to local regulations.

Note

: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior 

notice.

Important

: no liability is accepted for incorrect use of this product.

Warranty

: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Original Language Version

© Jack Sealey limited

A

UTOCHARGE650HF     Issue 1 22/08/18

Weee reguLatIoNs

Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment 
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid 

waste authority for recycling information.

 

symptom

solution

no reaction when powered on.

Check mains connection and power supply.

Return to Sealey stockist.

The icon permanently displayed.

I

ncorrect polarity - swap battery connections.

 Flashing icon

Check connections to battery. 

Check for broken cables. 

Return to Sealey stockist.

mode cannot be selected.

mechanical failure of switch.

Improper operation of switch.

Note: 

mode can only be changed when battery is not 

connected.

Содержание AUTOCHARGE650HF






Отзывы: