background image

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions 

and properly maintained, give you years of trouble free performance.

IMPORTANT:

  

PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL 

REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE 

PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY 

AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

INSTRUCTIONS FOR:

AIR CONDITIONING CLUTCH HUB 

PULLER/INSTALLER

MODEL No: 

VS604

1.1 

GENERAL SAFETY

 

WARNING!

 

Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this tool.

 

WARNING! 

Familiarise yourself with the specific applications and limitations of the kit, as well as any potential hazards.

  This kit should be used in conjunction with inspection maintenance procedures recommended in the vehicle manufacturer’s manual.

  Ensure that the kit is correct for the task.

  Wear the appropriate personal protective equipment for the task. A full range is available from your Sealey dealer.

 

DO NOT 

use the kit

 

for any purpose other than that for which it is designed.

  Ensure that the vehicle is properly supported with axle stands before working under the vehicle.

 

Ensure there is adequate lighting prior to using the kit. A range of inspection lamps are available from your Sealey dealer.

  Keep children and unauthorised persons away from the working area.

 

DO NOT

 use the kit if any parts are damaged or missing, as this may cause failure and/or personal injury.

 

DO NOT

 use the kit

 

when you are tired, or under the influence of alcohol, drugs or intoxicating medication.

  After use, store in a safe, dry childproof area.

  1.  SAFETY INSTRUCTIONS

  2. INTRODUCTION

  3. CONTENTS

VS604 Issue No.1 - 22/03/13

Original Language Version

© Jack Sealey Limited

Deluxe kit for the removal and installation of the air conditioning compressor clutch hubs. Designed to fit Harrison, Nippon Denso, Sanden, 

Tecumseh, York, Zexel but is also suitable for other compressor manufacturers.

Refer to Parts list on next page.

Отзывы: